Troubled employee? Handle with care

The only thing Project Leader Sam Norcross knew for sure was that Phil Potter's performance continued to decline. Every time he broached the subject, Potter, a bright young engineer, promised to improve, a promise he consistently broke.

08/01/1998


The only thing Project Leader Sam Norcross knew for sure was that Phil Potter's performance continued to decline. Every time he broached the subject, Potter, a bright young engineer, promised to improve, a promise he consistently broke.

When the supervisor tried to determine the reason for the decline, he hit a dead end. In response to his questions Potter assured him that nothing was wrong, he had no personal problems. Norcross didn't believe him. Something had to be wrong. He couldn't put his finger on what. But the Phil Potter on staff today was not the same guy who had been in his group for almost 2 yr now.

For one thing, he was drinking. Norcross had observed him several times at lunchtime downing booze at the bar where they ate. But he never had been drunk on the job, so he couldn't focus on that. Another thing: In the past Potter had been cheerful and friendly. In recent months he appeared grumpy and irritable as if it might hurt him to smile.

Something was troubling him, but Norcross couldn't figure out what.

Question : What, if anything, would you do in a similar situation?

Brill's counsel: Norcross discussed his concern with his boss. Plant Engineer Bob Brill listened thoughtfully as the project leader relayed his misgivings.

"It does look like something is wrong," he agreed. "A person doesn't suddenly change his skin like a lizard without some underlying cause.

"What to do about it, of course, is the question. My advice is to proceed gingerly. The safest approach in a situation like this is to discuss the job, not the man. In fact, that's all you have a right to discuss. Faulty work judgment, poor performance, and behavior affecting others in the department are legitimate subjects for discussion.

"Beyond that, you can suggest that Potter seek professional guidance if he needs it, even offer to help arrange it, but the one course not to take is to try to play psychologist yourself."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me