Treat yourself to training

This year, build a career habit to invest in sharpening your skills.

03/16/2011


Do you remember how much money you spent on your college education? You likely spent tens of thousands of dollars to learn the fundamentals that, in the end, probably taught you more about how to think than how to design a system or manage a team, project, or business.

Now, how much have you spent on training? I’m talking about good training—the kind that builds retention because you had to invest time in study, homework, or realistic projects.

Most licensed engineers have to obtain 15 hours per year in professional development hours (PDHs). That’s not a lot, and many engineers pick away at their requirements by attending one-hour Webcasts and lunch-and-learns. These are perfectly valid ways to stay on top of emerging issues, changes to codes and standards, and new technologies and products.

Other opportunities for continuing education are conference sessions. Again, these generally impart knowledge.

What I’m recommending is that you invest in training that helps you develop skills. Given where the market is and where it’s headed, here are four recommendations on what might help engineers today.

1. Economics: How to perform a variety of economic analyses on investments for making building systems more energy efficient. Engineers most often calculate payback periods; however, owners might make decisions based on return on investment (ROI), internal rate of return (IRR), net present value (NPV), or some other economic parameter. The better you can translate system performance into economic performance, the more you’ll sell better-performing systems.

2. Controls: How to design and specify controls for building systems. From laying out elegant and effective sequences of operation to minding the details for integration and interoperability, engineers generally need more training on controls. Most of the “movements” impacting building design and operations are putting enormous pressure on controls, including smart grid, energy efficiency, IAQ, measurement and verification, and monitoring-based commissioning.

3. Commissioning existing buildings: Retrocommissioning and monitoring-based commissioning are where a lot of energy services are going. Trane, Honeywell, Schneider Electric, Johnson Controls, and Siemens, which have traditionally been active in performance-based contracting, have been steadily expanding into existing-building commissioning. Because of the new-construction recession, so are many engineering firms. Look at recommendation No. 2 and do the math.

4. Communications. Whether English is your first language, you can use some training on technical writing, public speaking, and situational diplomacy (conflict management, etiquette, leadership, etc.). I’ve been a professional communicator in the buildings industry for more than 15 years and I need training, too. Just because you can form words with your mouth or keyboard doesn’t mean they’re the right words at the right time in the right way. Polishing your communications skills is probably the most cost-effective training investment you’ll ever make.

As for how to find good training, here are a few suggestions. First, look for training programs that include practice. For technical training, such as on commissioning and controls, you’ll want hands-on, in-the-field programs, or your retention will falter on the job. For communications, there are a lot of opportunities at colleges and seminars. The key advice is that you may want to build a relationship with someone who can coach you when you need it—to review a report or article, role-play an interview, or preview a presentation. The coach could be a paid professional, a mentor, or a colleague.

So treat yourself to training this year. You’ll not only acquire the PDHs, you’ll develop skills that will advance your career and your business.

Ivanovich is the president of The Ivanovich Group LLC, which provides research, analysis, and consulting services to the buildings industry. Read his blog at http://theivanovichreport.wordpress.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me