Toyota to expand Lexus production to Kentucky

Automaker’s $360 million investment ‘a tribute’ to Georgetown workers

04/19/2013


Toyota’s Georgetown, Ky. Manufacturing plant will begin producing the Lexus ES 350 in 2015. The automaker announced a $360 million plant expansion April 17. Courtesy: Toyota Motor CorporationToyota’s Georgetown, Ky. manufacturing plant, winner of Plant Engineering’s Top Plant award in 2006, won another big prize on April 17: A bigger investment from Toyota Motor Corporation.

The company announced it would expand the Georgetown facility over the next two years to bring production of the Lexus ES 350 to Kentucky. The $360 million investment will create 750 jobs and expand Georgetown’s output from 500,000 cars annually to 550,000. Company officials said the investment would “maximize benefit-cost ratio to enhance overall profit structure and to ensure the level of Lexus quality that consumers expect.”

Toyota Motor Corporation president Akio Toyoda said the past success at Georgetown with production of the Camry and other Toyota cars made the investment in this facility a wise one.

“Here in the United States, we chose Kentucky because of our successful 25-year partnership with the state,” Toyoda said during a press conference originating in New York. “It is also fitting that we chose Kentucky because it was Toyota's first stand-alone plant in America. So in a way, for manufacturing, Kentucky is Toyota's home.

He also praised the staff at Georgetown for its continuing excellence. “It also has some of the most-experienced Toyota team members in the world,” he said. “To our Kentucky teams watching this Webcast: This is a tribute to your extraordinary efforts and the hard work you have put into every single car for the past 25 years.”

“The decision to move ES 350 production to Kentucky is a true tribute to the hard work and commitment to excellence of every single Toyota team member at this plant,” said Toyota Kentucky president Wil James. “We deeply appreciate the tremendous support we have received from our community, from our local suppliers and business partners, and from (Kentucky Gov. Steve) Beshear and the Commonwealth of Kentucky. We look forward to strengthening further the productive partnership we have built together over the last 25 years.”

“In 2012, the plant produced the 25 millionth Toyota vehicle built in North America,” company officials said in a press release. “Toyota recently committed to boosting production capacity for the 4-cylinder engine at the plant by more than 100,000 units. This $30 million project will create about 80 new jobs.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me