Top 5 Plant Engineering articles, October 20-26: Building safety into maintenance, preventive maintenance, welding helmets, more

Articles about building maintenance into safety, setting up a smart-tool preventive maintenance program, welding helmets, and determining a motor’s actual load, and the 2014 Leaders Under 40 were Plant Engineering’s five most-clicked articles from last week, October 20-26. Were you out last week? Miss something? You can catch up here.

10/27/2014


Plant Engineering Top 5 most read articles online, for Oct. 20-26, covered building maintenance into safety, setting up a smart-tool preventive maintenance program, welding helmets, and determining a motor's actual load, and the 2014 Leaders Under 40. Link to each article below.

1. Building safety into maintenance 

Top 5 Plant Engineering articles, October 20-26There are a lot of safeguarding devices that are not properly applied or not securely fastened, bypassed, or damaged that could be remedied during a regular maintenance inspection.

2. Checklist: Set up a smart-tool preventive maintenance program

Here are a few tips for creating an effective preventive maintenance system on your plant floor.

3. Balance safety, productivity and comfort when choosing a welding helmet

A welder is only as effective as the level of personal protection he or she is getting on the job, and the helmet is one of the most important components in a welder's arsenal of personal protective equipment.

4. Keeping it simple: Steps to determine motor's actual load

Oversized motors cost more to operate-sometimes a lot more. Fortunately, there's a simple procedure for determining the actual hp required by a load, without expensive equipment or engineering.

5. 2014 Engineering Leaders Under 40

Control Engineering and Plant Engineering announce the 2014 Engineering Leaders Under 40. The Leaders each have a story to tell about their path into manufacturing. Read about them here.

The list was developed using CFE Media's web analytics for stories viewed on plantengineering.com, October 20-26, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me