Top 5 Plant Engineering articles, May 30-June 5: Digital transformation and IoT, benefits of using soft starts on ac motors, improving system efficiencies, more

Articles about digital transformation and IoT, benefits of using soft starts on ac motors, improving system efficiencies, finding value in KPI lifecycle, and Big Data were Plant Engineering's five most clicked articles from last week, May 30-June 5. Were you out last week? You can catch up here.

By Erin Dunne June 6, 2016

Plant Engineering top 5 most read articles from May 30-June, covered digital transformation and IoT, benefits of using soft starts on ac motors, improving system efficiencies, finding value in KPI lifecycle, and Big Data. Link to each article below.

1. IT leaders remain skeptical of digital transformation and IoT

Cisco’s sruvey on digital readiness suggest that information technology (IT) leaders around the world are not yet convinced of the industry’s ability to drive digital transformation, which is bad news for the Internet of Things (IoT). 

2. The benefits of using a soft starter on ac motors

Switching your ac motors to include a soft starter may results in an initial payout. Because of the reduced power consumption and maintenance, they will typically pay for themselves very quickly, and the benefits will be fully experienced from that point forward. 

3. Regulations look past motors to improve system efficiencies 

Electric motor system efficiency and power electronics are impacting future energy saving opportunities as attention moves from motor efficiency to motor-driven system efficiency. 

4. How to find value in a KPI lifecycle 

Key Performance Indicators (KPIs) are part of a lifecycle because KPIs are continuously defined, redefined, and are even sometimes abandoned. Explicitly defining a KPI lifecycle provides an impetus for the development of methods and tools that enhance performance. 

5. Is Big Data the means for survival in a down market? 

In an uncertain market, more oil and gas produces are relying on advanced analytics to make intelligent cost-cutting decisions. 

This list was developed using CFE Media’s web analytics for stories viewed on www.planengineering.com, May 30-June 5, for articles published within the last two months. 

Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com.

Original content can be found at Oil and Gas Engineering.