Top 5 Plant Engineering articles, May 23-29: Why Lean fails so often, failure curves and P-F intervals, equipment and maintenance purchasing, more

Articles about why Lean fails so often, failure curves and P-F intervals, equipment and maintenance purchasing, natural gas production, and benchmarking were Plant Engineering's five most clicked articles from last week, May 23-29. Were you out last week? You can catch up here.

05/31/2016


Plant Engineering top 5 most read articles from May 23-29, covered why Lean fails so often, failure curves and P-F intervals, equipment and maintenance purchasing, natural gas production, and benchmarking. Link to each article below. 

1. Why Lean fails so often

When something fails more than 90% of the time, it is usually tossed to the curb. Lean implementations fail at least that often. Why do they fail so often, and why do companies keep trying? 

2. Failure curves and P-F intervals linked and explained

If the failure curves show the probability of defects introduced over time based on an individual failure mode, then the P-F shows the resistance to failure over time once the failure defect has occurred. 

3. Controlling the demands on equipment and maintenance purchasing

There is no "one size fits all" purchasing process for maintenance organizations—and for good reason. How your team may conduct supplier relations and what spare parts are purchased may well assist in contributing to your company's competitive advantage. 

4. U.S. continues to lead in natural gas production

For the fifth year in a row, the United States leads the world in the production of natural gas, and that lead is widening. 

5. Benchmarking 201: How to learn fast and leapfrog the competition 

One key best practice is benchmarking the function or process across different industries—especially companies in fast-moving markets and high competition. 

This list was developed using CFE Media's web analytics for stories viewed on www.plantengineering.com, May 23-29, for articles published within the last two months. 

Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me