Top 5 Plant Engineering articles, March 9-15: ac motor repair, lean manufacturing’s ingredients, industrial Internet on the factory floor, more

Articles about ac motor repair, lean manufacturing’s two key ingredients, the industrial Internet on the factory floor, top 5 signs of reliable plant, and expanding the maintenance toolkit were Plant Engineering’s five most-clicked articles from last week, March 9-15. Were you out last week? Miss something? You can catch up here.

03/16/2015


Plant Engineering Top 5 most read articles online, for Mar. 9-15, covered ac motor repair, lean manufacturing's two key ingredients, the industrial Internet on the factory floor, top 5 signs of reliable plant, and expanding the maintenance toolkit. Link to each article below.

1. A systematic approach to ac motor repair

The only national standard for repair of motors and generators is ANSI/EASA AR100-2010: Recommended Practice for the Repair of Rotating Electrical Apparatus (AR100). 

2. Lean's two key ingredients

Lean programs usually begin with good intentions. But sustaining the effort is the biggest challenge. 

3. Test bed designed to bring industrial Internet to factory floor

The Industrial Internet Consortium Test Bed, the "Track and Trace" development, is designed to drive forward tool connectivity to improve industrial manufacturing and bring the industrial Internet onto the factory floor. 

4. The top 5 signs of a reliable plant

Having visited hundreds of manufacturing plants in the last 15 years, someone recently asked me if there were any traits the most reliable plants all had in common. 

5. Expanding the maintenance toolkit for 2015

OSHA standards Effective as of January 1, the new OSHA standards are designed to help improve workplace safety, in light of statistics showing more than 4,000 workers killed on the job in 2013. 

The list was developed using CFE Media's web analytics for stories viewed on plantengineering.com, March 9-15, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me