Top 5 Plant Engineering articles, March 23-29: Hacking oil and gas control systems, dc drives in an ac age, U.S. named Hannover Messe 2016 Partner Nation, more

Articles about hacking oil and gas control systems, dc drives in an ac age, U.S. being named Partner Country for Hannover Mess 2016, the top 5 signs of a reliable plant, and refining in the oil and gas industry were Plant Engineering’s five most-clicked articles from last week, March 23-29. Were you out last week? Miss something? You can catch up here.

03/30/2015


Plant Engineering Top 5 most read articles online, for Mar. 23-29, covered hacking oil and gas control systems, dc drives in an ac age, U.S. being named Partner Country for Hannover Mess 2016, the top 5 signs of a reliable plant, and refining in the oil and gas industry. Link to each article below.

1. Hacking oil and gas control systems: Understanding the cyber risk

Cyber attacks are growing in number and intensity over the past decade. Companies in the oil and gas industry are high-profile targets and must take measures to protect themselves from hackers. 

2. Still relevant: dc drives important in an ac age

For brute force speed control applications where positioning or extremely precise control are not required, it's hard to beat a dc motor and drive. While the basic design of the brushed dc motor has not changed much, the technology used to control the dc motor's speed has evolved over the years. 

3. U.S. to be Partner Country at 2016 Hannover Messe

President Barack Obama is expected to appear at the 2016 Hannover Messe, which will be April 25-29 in Hannover, Germany and address the opening ceremonies in an event that also will showcase American culture. 

4. The top 5 signs of a reliable plant

Having visited hundreds of manufacturing plants in the last 15 years, someone recently asked me if there were any traits the most reliable plants all had in common. 

5. Understanding business drivers in O&G: Refining enjoys some good times

Some parts of the refining segment have emerged as beneficiaries of these confusing market conditions. So how are refiners taking advantage of this prosperity-while it lasts? 

The list was developed using CFE Media's web analytics for stories viewed on plantengineering.com, March 23-29, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me