Top 5 Plant Engineering articles, March 2-8: Internet of Things in manufacturing, PMI Index, process hazard analysis, more

Articles about the Internet of Things in manufacturing, the February PMI Index, process hazard analysis tips, research at the University of Houston, and Lean manufacturing’s two key ingredients were Plant Engineering’s five most-clicked articles from last week, March 2-8. Were you out last week? Miss something? You can catch up here.

03/09/2015


Plant Engineering Top 5 most read articles online, for Mar. 2-8, covered the Internet of Things in manufacturing, the February PMI Index, process hazard analysis tips, research at the University of Houston, and Lean manufacturing's two key ingredients. Link to each article below.

1. What does the Internet of Things mean to people who make things?

Think: The connected machine. Industrie 4.0 and IoT in manufacturing are about connecting machines (to each other, to expert systems, and to management execution systems) to get more actionable information using intelligent devices at lower levels of the system architecture. 

2. Dock slowdown has impact on sliding PMI

The announced settlement of the West Coast dock workers slowdown came a little too late to boost the Institute for Supply Management's (ISM) monthly PMI Index in February. 

3. Seven items to address with your process hazard analysis

Process hazard analysis (PHA) should provide information that will improve safety and reduce danger from hazardous chemicals. Here are seven items your PHA must address. 

4. Developments to watch at the University of Houston

Ramanan Krishnamoorti, the chief energy officer at the University of Houston, talked about some of the developments and research they are performing including nanotechnology, distributed acoustic sensing, and using real-time data in exploration. 

5. Lean's two key ingredients

Lean programs usually begin with good intentions. But sustaining the effort is the biggest challenge. 

The list was developed using CFE Media's web analytics for stories viewed on plantengineering.com, March 2-8, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me