Top 5 Plant Engineering articles, February 23 to March 1: Reliability centered maintenance, plant operations and designers, Internet of Things in manufacturing, more

Articles about reliability centered maintenance, plant operations and designers, the Internet of Things in manufacturing, machine vision and robotics, and facilities maintenance and planning were Plant Engineering’s five most-clicked articles from last week, February 23 to March 1. Were you out last week? Miss something? You can catch up here.

03/02/2015


Plant Engineering Top 5 most read articles online, for Feb. 23-Mar. 1, reliability centered maintenance, plant operations and designers, the Internet of Things in manufacturing, machine vision and robotics, and facilities maintenance and planning. Link to each article below.

1. Five ideas that can drive success with reliability centered maintenance and equipment maintenance plans

See these five suggestions to make sure that your reliability centered maintenance and equipment maintenance plans are successful. 

2. Plant operations now a part of the designer's goals

Marriage of CapEx and OpEx the best way to leverage design data, experts says. 

3. What does the Internet of Things mean to people who make things?

Think: The connected machine. Industrie 4.0 and IoT in manufacturing are about connecting machines (to each other, to expert systems, and to management execution systems) to get more actionable information using intelligent devices at lower levels of the system architecture. 

4. Future of machine vision for robotics

Engineers from Ford Motor Co. and General Motors Co. discussed technology advances needed for next-generation machine vision to help robotics and motion control. 

5. Nine reasons your facilities maintenance planning and scheduling effort isn't giving you the benefits you expect

Every organization should use either a CMMS or work order management system to manage preventative maintenance work requests. However, facilities maintenance planning and scheduling effort may not always be delivered as intended. 

The list was developed using CFE Media's web analytics for stories viewed on plantengineering.com, February 23 to March 1, for articles published within the last two months.

- Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me