Top 5 Plant Engineering articles: December 19-December 25: 2016 Product of the Year Finalists, importance of short-circuit rating, 2016 Top Plant, more

Articles about 2016 Product of the Year Finalists, importance of short-circuit rating, 2016 Top Plant, bearing failures beyond root-cause analysis, and data management driving IIoT were Plant Engineering's five most clicked articles from last week, December 19-December 25. Were you out? You can catch up here.

12/27/2016


Plant Engineering's top 5 most read articles from December 19-December 25, covered 2016 Product of the Year Finalists, importance of short-circuit rating, 2016 Top Plant, bearing failures beyond root-cause analysis, and data management driving IIoT. Link to each article below.

1. 2016 Product of the Year Finalists

View the 114 Finalists across 15 categories; cast your vote for the 2016 Product of the Year

2. Why is short-circuit current rating important?

It is important to verify and improve short-circuit rating to remain in compliance.

3. 2016 Top Plant: A focus on people and culture 

While much of the U.S. automotive industry was struggling to survive the aftermath of the most recent recession, MFC Netform, the 2016 Plant Engineering Top Plant winner, held its own.

4. Diagnose bearing failures beyond root cause analysis

Take a 'CSI' approach to root cause analysis to look beyond the obvious to determine why bearings are failing. Six types of failures and 12 tips for determining the root cause are featured.


5. IBM: Data management is driving the IIoT revolution

Better analysis and more collaboration needed to take full advantage of IIoT's accelerated use.

This list was developed using CFE Media's web analytics for stories viewed on www.plantengineering.com, December 19-December 25, for articles published within the last two months.

-Brana Webb, production coordinator, CFE Media, bwebb@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me