To use robots effectively, get started, get coaching

Robotiq integration coach David Gariépy talks about how to use robotics effectively and what the future of the industry looks like.

06/08/2017


David Gariépy, integration coach, Robotiq. Courtesy: RobotiqAs robots become a larger part of the manufacturing landscape, programming the robots may be an early barrier to their use on the plant floor. Quebec City, Canada-based Robotiq has introduced a series of downloadable programming templates to help get the process started. Robotiq integration coach David Gariépy talks with Plant Engineering about how manufacturers are dipping their toes into the robotics market, some of the challenges of working with collaborative robots, known as cobots, and some of the challenges they face:

Plant Engineering (PE): When manufacturers are first exploring using robots on their assembly line, do they know what they need, or, as your job title implies, is there some coaching to be done?

Gariépy: Most of the time, they want to validate the possibility to automate a given task and be guided on how to do it. The coaching is really useful, as we can do a proof of concept, give them the program code we used and explain the programming logic so they have something to start with.

The coaching service is useful at the beginning of the process but also during the implementation. We help them remove the blockers they might encounter and speed up their integration process. It allows them to grow their know-how skills faster and go forward with a new project sooner.

PE: What's the one challenge manufacturers face when integrating robots into their manufacturing process? How can they meet those challenges?

Gariépy: The main challenge is definitely the know-how skills; 82% of manufacturers believe the skills gap will impact their ability to meet the customer's demand. It is 10 times more difficult to find robotics skills than machinist skills in the U.S. workforce.

How can they meet those challenges? By getting started with cobots as soon as possible. At first, they should keep it small and simple. Highly predictable and repeatable tasks are the best ones to start with. They can then build their know-how skills and start scaling up to more robots with more complex applications.

So start small and build on your success. Another interesting fact is that once you've started, the subsequent cobots implementation usually takes 30 to 50% less time than the first one. The free coaching service and programs templates that Robotiq is offering allow manufacturers to simplify and speed up the implementation of cobots in their production line.

PE: As the concept of cobots continues to evolve, how do we keep humans engaged and important in the manufacturing process?

Gariépy: The biggest misconception people have about cobots, and robots in general, is that it has to be done at the cost of jobs. In reality, the opposite usually happens. It allows manufacturers to become more productive, so they get more orders. The employees then can be moved to more rewarding jobs and eventually, new jobs are created. Our goal at Robotiq is to free human hands from repetitive tasks in order to give them the freedom to think, to create, and to innovate.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me