To record or not to record: That is the question

Conventional wisdom tells us any activity that falls under the asset maintenance umbrella should be captured in CMMS.

07/29/2013


A longstanding debate has resurfaced lately about the merits of preventative maintenance (PM) for non-asset tasks. Conventional wisdom tells us any activity that falls under the asset maintenance umbrella should be captured in CMMS. Maintenance activities aimed at eliminating equipment failures should be PM'd and documented in CMMS.

CMMS distinguishes between PM and unplanned, non-preventative maintenance. For example, one of our lubricant product manufacturing customers keeps a separate PM calendar for scheduling non-asset tasks, including meter readings, and occupational and environmental safety checks for water contamination analysis and prevention, and other municipal safety inspections.

A decent CMMS should provide work orders that have ample classification codes, priorities and other information that helps users get to the heart of the asset's history. They use that data for predictive maintenance analysis, asset replacement and capital budgets. This supports the creation of separate PM calendars for non-asset tasks.

Any volume of data in your CMMS should not present challenges. The CMMS system should allow you to track any quantity of PMs, non-PM WOs, etc. without degrading performance. Therefore, deciding to include (or not include) PMs should not be based on CMMS performance.

One of our CMMS resellers advises users to record pretty much everything in CMMS so they can access and analyze information, and build reports from one source.

However, some of our customers argue that while CMMS keeps track of all activities performed on an asset, non-asset tasks should be separated out. They group non-asset tasks outside the scope of information they're capturing in CMMS, including:

  • Tasks with costs not assigned to specific assets
  • Vendor-owned and operated equipment, such as vending machines and pest control repairs.

Other customers agree that while equipment maintenance tasks need to be scheduled and documented in CMMS, certain inspections don't warrant CMMS management, such as QA inspections, operator rounds, pest control, and other very basic/generic scheduled tasks.

Another customer told us they have certain equipment that requires zero maintenance. At first he assigned each an asset number, and associated department and "owners" in the CMMS, but didn't create any PMs so the assets weren't tracked or inspected. After a while he saw the value of creating PMs to make sure the assets were still working and that they hadn't "walked off" the facility because of carelessness or dishonesty at the shipping and receiving docks.

Rarely do users hit a plateau where they think, "Do I really need this basic information in my CMMS?" As long as your CMMS has the functionality, you should be using it as a single, central repository for every task that falls under maintenance, whether it's related to an asset or not, or requires a PM or not. There is a basic truism in data management: any data entered in two or more places will eventually be different. Keeping your data consistent, available, and organized in one CMMS will not only benefit you now, but in the long term, particularly when that task or inspection becomes critical to optimizing your maintenance department.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me