To develop Lean culture, first build 'wildfire engagement'

Building an understanding of Lean manufacturing and showing how it can benefit manufacturers in the short- and long-term is vital

12/13/2013


Engagement is communication. That’s the message I brought forward during my session on “Why Skinny is the New Lean,” at the AME conference in Toronto in October.

To obtain a culture that is committed to Lean, it’s imperative that employees are engaged; that is, they must understand three fundamental questions: 

  • Why are we introducing Lean?
  • How is Lean different than other “improvement” initiatives we’ve tried?
  • How will I benefit from this? 

Each of these questions is equally important when introducing Lean, and in order to maximize the velocity of the initiative, we must engage all of those involved, from employees to suppliers, leaders to contractors. The engagement must be quick, decisive, and targeted. I call this “Wildfire Engagement,” as we build from a small ember that must not only support its own flame, but also spread organically and rapidly without our direct influence.

How can you build wildfire engagement?

Engagement has always been built upon strategically targeted communication, meaning messages are designed to achieve their intent, and are distinctly different for each specific group involved. Take, for example, an engagement plan to introduce the business strategy, which would entail the following considerations:

  1. Why does the business need a strategy? How has it helped/hindered business in the past?
  2. Why is a change in strategy necessary now? Why not last week or next year?
  3. How will the new strategy help employees achieve their objectives?
  4. The role each employee and each work group plays in delivering the strategy.
  5. How employee feedback will be incorporated into delivering the strategy. 

The list goes on, but these are the fundamental questions to be considered. Point No. 3 is the most critical.

You must understand what is important to employees generally, and what is important to each of them specifically.

I recently helped a great client of mine formulate a strategy. When we were considering the points above (prior to introducing the new strategy to the employees), we brainstormed around Point No. 3. What emerged was the realization that the year before, employees had been selected to meet with the company president to provide feedback on the business and their perceptions of it. Nearly all of the employees who were interviewed identified that working at the company was important to them as it allowed them to live and work in a beautiful rural community. This became the basis of “what mattered to employees generally.”

We then set about determining what was important to each group of employees (i.e., skilled trades enjoyed the ability to cross train in other disciplines; production employees enjoyed the shift flexibility). By the end of this session what arose were some very clear points that had come directly from employees. We were in turn able to use these to communicate how the new strategy will help employees achieve their objectives.

The theme went something like this:

  • To live and work in this beautiful rural community we must grow our business.
  • To grow our business we must increase our production capability.
  • To increase our production capability we must improve our skills base (Strategic Objective No. 1).  

So what I want to suggest to you today is that in order to engage your employees in your Lean initiative, you must first consider the five areas above, and then determine what specifically matters to your employees. If you plant this seed correctly, obtaining feedback from employees and addressing it in a consistent manner, your engagement will take off like wildfire. And that will help you advance your Lean movement faster than you ever thought possible. 

Shawn Casemore is the founder and president of Casemore and Co. Incorporated, a consulting company helping organizations improve their operational performance. This column first appeared in Target Online, the magazine of the Association for Manufacturing Excellence, a CFE Media partner.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me