Tips for optimizing lift truck fleets

05/15/2007


Lift truck fleet owners may be surprised to learn that the actual purchase price of a lift truck is typically only 20 percent of the overall cost of ownership. Operator salaries and maintenance account for the remaining 80 percent of those costs. However, many opportunities are available to reduce overall ownership costs simply by optimizing the lift truck fleet.

Work with a solutions-focused dealer
A solutions-focused dealer can provide the plant many ways to reduce lift truck fleet ownership costs. The most astute dealers will help determine a cost baseline for your existing fleet and provide quantified cost analysis %%MDASSML%% a necessary first step %%MDASSML%% and can also offer full maintenance contracts, parts programs, operator training and fleet management software.
With a comprehensive, fixed-price maintenance contract, a dealer performs all maintenance for a set monthly fee, simplifying maintenance budgets. Parts availability is also central to maintaining truck uptime, so an effective parts distribution network facilitated though a lift truck manufacturer and its local dealers is essential. Proper operator training can also extend truck operational life and increase productivity, as operators who know how to use equipment properly generally make fewer mistakes and take better care of equipment.
Finally, fleet management software can help large companies with multiple facilities track costs by tying all locations together and providing headquarters with quantifiable data regarding each facility’s fleet operating costs.

Employ new technologies
Employing new technologies can also help improve productivity and lower operating costs. Lift trucks with AC motors increase productivity because they maintain a high level of performance throughout the battery cycle and can run longer on a single battery charge, so battery changes are not required as often. By eliminating one battery charge per AC truck in a three-shift operation, manufacturers can save labor costs and up to $3,000 for each replacement battery.

Joe Lafergola is the manager of Raymond national accounts, fleet management group. He is in his 11th year at Raymond and has extensive experience in reliability engineering with the company. He has a bachelor’s degree in electrical engineering from the State University New York-Buffalo.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me