Tie Lean, Six Sigma strategies to plant worker's knowledge

While manufacturing improvement strategists have their supporters, researchers who look at the implementation of such programs understand that engaging workers at the plant floor level is crucial to success. “Most people on the plant floor are not used to being asked questions, but it is a key leap of the continuous improvement program,” said Ralph Rio, research director for ARC Adv...

03/01/2007


While manufacturing improvement strategists have their supporters, researchers who look at the implementation of such programs understand that engaging workers at the plant floor level is crucial to success.

“Most people on the plant floor are not used to being asked questions, but it is a key leap of the continuous improvement program,” said Ralph Rio, research director for ARC Advisory Group at their Collaborative Manufacturing Strategies Forum in Orlando Feb. 14. “It takes two years to get through the cultural change, but if you have the first mover advantage, you can exert pressure on your competitors.”

In those two years, Rio noted, starting with a Lean strategy and augmenting it with Six Sigma allows for the plant to measure the process and people involved in manufacturing. “Six Sigma aligns the organization vertically, while Lean is horizontal,” Rio said. “In some organizations, there's some conflict, but that's usually empire building.”

“The success of the strategy is driven by both a top-down management initiative and the full engagement of the plant manager,” said Paul Husby, vice-president of supply-chain services and operations for 3M.

“The value of a top-down program is essential,” Husby said. “The first two hours of a plant manager's day is spent on the shop floor. This is a huge cultural change. The plant manager either leads this effort or it won't work.”

Husby related that one plant production manager at a 3M facility said, “Since this started, I know so much more about the day-to-day details of what's going on in my area.”

Husby said the integration of the Lean system and the data available from MES systems is another important factor in driving change through Lean and Six Sigma. “Stability controls the speed of improvement. MES is a vital part of this stability,” Husby said. “Your MES provides a lot of data and monitors defect detection. That's a key part of how you improve stability.”

A continuous improvement program is a major part of what successful manufacturers need to remain competitive. Rio noted that the attention to continuous improvement also can keep other plant floor pressures at bay. “Cost is a variable,” Rio said. “Continuous improvement is about the only thing you can control.”

Plant Engineering magazine was a media sponsor of the ARC Advisory Group forum. Details on the event can be found at www.arcweb.com .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me