Three ways to improve your proactive maintenance plan

Plant managers should challenge old beliefs about maintenance and adopt new ones.

05/16/2014


1. We are all capable of preventing or containing every single failure that may occur: PLE1405_WEB_ARG Post_v2: Courtesy of ARG

Manufacturing managers have to believe that with careful study and continual refinement, each and every failure can be addressed either through redesign or careful application of a proactive maintenance task.

2. More proactive maintenance is not necessarily better than less proactive maintenance:

Many times we carpet bomb our equipment with way too many proactive maintenance tasks performed too frequently. Nobody cares how many proactive maintenance tasks you perform; they only care about safety, cost, and uptime. When we perform too many proactive maintenance tasks, we diminish the credibility of the really important tasks with non-value-added tasks. We must continue to find the right balance between tasks that will predict and prevent failures.

3. The details beneath the task matter:

If we want to predict and control failures, we can no longer afford to send out people with task descriptions that read, “check the gearbox.”  We need to understand there is a right way and a wrong way to perform tasks, and statements such as “check the gearbox” leave too much to the imagination. In situations such as this, I often get pushback that sounds something like “you have to understand, every one of our mechanics has been here for more than 30 years, and they know how to inspect a gearbox.”

We need to get quantitative with our task descriptions (see the graphic). Once we get quantitative, we have a baseline to build upon. We need to realize that “continuous improvement" of our proactive maintenance program is not some buzzword that we toss around in meetings when we are trying to impress our boss. It must become the core of who we are as an organization. Improving these tasks is a career-long commitment, and we never lack for opportunities to learn and improve.

Mike Gehloff is a principal at the Allied Reliability Group and a former maintenance and reliability director. Edited by Jessica DuBois-Maahs, associate content manager, CFE Media, jdmahs@cfemedia.com

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me