Three ways to add measurable value to a manufacturing organization

How using a maintenance planner can increase wrench time, scheduled compliance, and make the manufacturing floor a more safe and efficient work environment.

05/09/2014


1. Maintenance planners can increase wrench time 

A typical maintenance worker's day can be filled with waste.  It is no fault of their own, but it's a plant manager's inability to plan and schedule that causes this waste to occur (See the graph).  Wrench time is defined as the time spent by maintenance personnel physically interacting with the equipment, such as making repairs, performing inspections, applying lubrication. For many organizations, wrench time accounts for just 35% of an employee's day. The remainder of the time goes to many non-value-added activities such as travel time or coordination delays. 

Wrench time is defined as the time spent by maintenance personnel physically interacting with the equipment, such as making repairs, performing inspections, applying lubrication. For many organizations, wrench time accounts for just 35% of an employee's day. Courtesy: ARG
Enter the maintenance planner. The planner's role is to shrink as many of these other factors as possible and add them back to the wrench-time component.  Research shows that we can achieve wrench-time values as high as 50% or 60% with a focused approach to scheduling and planning. 

2. Increase maintenance schedule compliance

Better-planned jobs yield better executed work. The more research and detail that goes into each job increases the accuracy of a plant manager's time estimates, which increases compliance with a schedule. The end result of schedule compliance is getting more of the most important work done in any given week.  This will reduce (or at least minimize) the impact of future failures.  The devils in the details here: greater efforts by the maintenance planner produce better time estimates, which enable superior execution.

3. Contributing to a safer, more efficient workplace

Sometimes the job of the maintenance planner can seem like a clerical nightmare where their job is to fill out the paperwork and account for parts and people’s time. But this is not an accurate portrayal. 

Here is what you add to the equation as a maintenance planner:

  • Safer execution through identifying the hazards in advance
  • Efficient execution through specifying the people, tools, and parts that will be needed.
  • Less busy work through collaborating with the workers on the best methods to be used when the work is executed.


Mike Gehloff has worked in the maintenance and reliability discipline for more than 20 years with a wide range of experience both as a practitioner and a consultant. Mike is the Discipline Leader for both the Work Execution Management and the Operator Care practices. He currently works with the Allied Reliability Group. (Link: http://www.alliedreliabilitygroup.com)

-Edited by Jessica DuBois-Maahs, associate content manager, CFE Media.  jdmaahs(a)cfemedia.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me