Think we're getting younger? Dream on...

The inability to find younger workers in manufacturing continues to be a growing problem as the workforce gets older and older

02/12/2014


Every time that I look in the mirror
All these lines on my face getting clearer…

- Dream On, Aerosmith 

They started showing up last month in groups of five or six at a time. Infiltrating. Expanding. Taking hold and taking control.

I’m starting to go gray.

This is a major revelation, and something I have worked hard to avoid, and then ignore. I have spoken with my hair at length to try and forestall the inevitable. And honestly, I’ve held out longer than I expected.

But then I hearken back to Steven Tyler’s haunting lyrics, and I realize that time marches on. We’re all headed in the same direction at the same pace. Some of us are just farther along the journey.

If there is one statistic from Plant Engineering’s 2013 Salary Survey that drives this point home, it’s that our readers have, as a group, aged one year on average every year for the past five years. That’s what’s supposed to happen, right? Well, statistically, no. What’s supposed to happen is that some people drop off the far end, and other people jump on the near end, and taking into account all the variables in between, the numbers should fluctuate and move more than that.

But they aren’t. Collectively, we as a group are getting a year older every year. And that does not bode well for our industry. The new blood we’ve been waiting for hasn’t arrived, and we need a transfusion of youth, and soon.

The single biggest threat to American manufacturing’s dominant resurgence in the last five years is the ability of this sector to keep pace with the growth demands. We have done amazing things in the last five years. American manufacturing again leads the world in productivity and output, and while Europe has staggered under a less robust economic recovery and China is buried by the weight of its own oversized growth needs, the U.S. manufacturer has won global admiration—and won back jobs at the same time.

The other big statistic from this year’s Salary Survey is the widening gap between the issue of workforce development and all the other issues in manufacturing. According to Plant Engineering readers, the Skills Gap in manufacturing has been the No. 1 issue facing manufacturing plant for the nine years we’ve been asking that question. Before the recession, during the recession, and after the recession, that’s been what plant managers have worried about. At the height of the 2009 recession, economic issues were also top of mind, but the Skills Gap has prevailed as a factor inhibiting manufacturing plant floor leaders from reaching greater productivity.

Every year the recognition of the problem grows greater, and every year the situation grows direr. And every year we miss another opportunity to recruit and retain and revitalize our industry with fresh talent and a fresh view of our opportunities.

This month we write about the opportunity for military veterans to join the ranks of manufacturing and help plug this gap. We do so with the full knowledge that even if every military veteran leaving service this year took every available manufacturing job, we’d still only be halfway to fully plugging the Skills Gap. And we know that’s not going to happen.

Veterans provide a few things we look for in every employee hire: They have been trained on the most sophisticated equipment available. They are disciplined and committed to completing tasks. They come with an uncommon commitment to doing a job. They volunteered for military service, and beyond our gratitude for their service, they also deserve recognition for the act of stepping up to take on a tough job.

As our story points out, this is not a straight line solution. As the people we talked to about this issue admit, the military and the manufacturer don’t do their jobs the same way, or with the same goals. Also, when you talk about large numbers of people, you tend to forget about the individuals in that group, and there are many issues individuals face in their journey out of the military and back into civilian life.

Whatever we owe to our soldiers, we also must recognize that time continues to tick by, and we are no closer to making a significant dent in our problem. More than any other factor, time is our enemy.

And one look in the mirror reminds us all: We’re not getting any younger.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me