Thermal imaging cameras

Fluke has five new infrared cameras designed with automatic focus and an IR-fusion camera and is designed to be used in troubleshooting and diagnostic routines out in a number of fields.

03/01/2012


Fluke has five new infrared cameras designed with automatic focus and an IR-fusion camera and is designed to be used in troubleshooting and diagnostic routines out in a number of fields. Courtesy: FlukeFluke introduces five new infrared cameras with a broad range of powerful capabilities that easy to use for troubleshooting and diagnostic routines.

Capabilities include:

  • It has an automatic focus with a manual focus option for close-ups and is easy to take sharply focused, accurate images. 
  • The industry’s only point-and-shoot IR-Fusion infrared camera. Fluke patented-technology blends digital and infrared images into a single image to precisely document problem areas.
  • It weighs only 1.63 lbs and is designed to sit perfectly in the hand, and all buttons are within gloved-thumb reach. Light enough to aim either vertically or horizontally and to use for long stretches without tiring out your hand.
  • Fluke thermal imagers are built to be put to work – what other infrared camera is tough enough to survive drops up to 6.5 ft and go right back on the job?
  • Record focus-free video in visible light and infrared with full IR-Fusion capabilities. Monitor processes over time, troubleshoot frame-by-frame, and create infrared video reports. 
  • Capture up to three digital photos per thermal image file and keep an exact record of equipment models, nameplates and other useful information.
  • Make sure you and others know the location of the problem by saving the compass reading with the thermal image.
  • IR analysis and reporting software Professional suite of analysis and reporting tools for viewing, annotating and editing infrared images. Always included, with unlimited licenses and free lifetime upgrades.

There are five models available and all of them are uniquely valuable to users out in the field.

  • Ti110 and Ti125 for plant technicians, HVAC/R professionals and electricians who need to maintain and inspect electrical and mechanical equipment and components.
  • TiR110 and TiR125 for building inspection and energy audit professionals evaluating and reporting insulation problems, air leakage, moisture issues, or construction defects.
  • Ti110, Ti110, Ti125, TiR110, and TiR125 infrared cameras include IR-OptiFlex focus system, IR-PhotoNotes annotation system, focus-free video, IR-Fusion technology, and SmartView.
  • Ti100 for general applications — the same ruggedness and ease-of use for value conscious professionals. 

These infrared cameras come with ac power adapter, lithium ion smart battery (Ti125 and TiR125 include two each; others one each), USB cable for direct to PC image download, SD memory card, hard carrying case, soft transport bag, adjustable hand strap (left- or right-handed use), and manual (5 printed, 18 electronic). Ti125 and TiR125 models also include a two-bay charging base, a multi-function USB memory card reader and a separate, longer USB cable for streaming video use.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me