There’s still time to get this decade right

There were a number of lists making the rounds at the end of 2009. I’d say there were about 2,009 lists, to be exact, all touting the greatest achievements of the last decade – best movie of the decade, best athlete of the decade, best album of the decade. There were also a large number of lists celebrating the worst of the decade, but I see no need to be negative, except to point o...


There were a number of lists making the rounds at the end of 2009. I’d say there were about 2,009 lists, to be exact, all touting the greatest achievements of the last decade %%MDASSML%% best movie of the decade, best athlete of the decade, best album of the decade. There were also a large number of lists celebrating the worst of the decade, but I see no need to be negative, except to point out this:

I’d have to turn in my membership card from Trivia Nerds Anonymous if I didn’t remind everyone that the end of the first decade of the Third Millennium still has one year to go. Since there was no Year Zero, each decade begins with the year 01 and ends with the year 10. Not my fault. Don’t blame me. Feel free to take it up with Congress %%MDASSML%% they’re legislating everything else these days.

I certainly understand why we’d be in a rush to be over and done with this decade. Between the economy and the environment, 2009 wasn’t a terribly happy year. And 2001 was a year no one wants to revisit anytime soon.

But at least officially, we still have one more year for the Double-Ohs, or the Aughts, or whatever we want to call this 10-year stretch. (Maybe that’s part of the problem %%MDASSML%% it’s been 100 years since we’ve had to give the decade a cool name, like the Roaring 20’s, and so it’s all been a little awkward.)

If you look into the night sky, you can see the darkness, or you can see the bits of twinkling light. I choose to be more of an optimist at this point. So let’s not be so quick to cast this decade off into history. We still have one more chance to get something positive out of this 10-year run. So as we officially, formally, mathematically wrap up the 2000s, let’s look at a few good things on the horizon for the coming year:

  • We’re paying attention to sustainability : Even the most ardent non-believer in global warming would concede that using less energy and more renewable energy is a smart business practice on a par with not wasting copier paper or counting paper clips. The side benefit of all of this sustainability talk is that it actually might stretch a few more millennia out of this old plant, so some editor a thousand years from now (and we will still need editors a thousand years from now) can have the same trivial argument over whether 3009 was the end of the decade.

  • We’re finally tackling workforce development for real : In every poll in every part of manufacturing, the lack of a skilled workforce continues to be a major issue. There is finally some federal attention to this subject, but the best way to develop the next generation of manufacturing professionals is to develop the kind of grass-roots programs we’ve written about in places like Iowa and Alabama, where union tradesmen, community economic development departments and educators are showing the way to the future.
    In conjunction with Mobil Industrial Lubricants, Plant Engineering will sponsor the Future 30 program in 2010 to call greater attention to the young people who have chosen manufacturing as a career. We want your input on young people who are making a difference in your plant.

  • The world is taking a new look at the U.S. as a manufacturing leader : Because they are trying to get closer to their customers, because they are trying to reduce transportation and energy costs and because they value quality production, global manufacturing leaders are building plants in the U.S., and some U.S. manufacturers are returning their operations here. It’s not in volume yet, and it’s not enough to overcome the losses of the last two years, but we must keep our standards high and offer an alternative to cheap, shoddy manufacturing.

    • This isn’t the time to point fingers, or look for others to blame. We’ve tried that, and it doesn’t work. Plant by plant, city by city, we can revitalize manufacturing through innovation and hard work. And there’s still time.

      Let’s not let history say that despite all the challenges at the start of the Third Millennium, we quit on this decade before it was over. We still have 12 months to build on our momentum and bring the decade to a close by meeting those challenges.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me