The world looks to U.S. for machine tool market growth

The focus was on an evolving and growing international market at the 2008 IMTS show in Chicago in September. Both China and Japan made presentations about their own machine tool shows, and both emphasized the strengths of the market in Asia. At the same time, there was a look toward the Americas – in particular the United States and Brazil – for continued strength in the market.


The focus was on an evolving and growing international market at the 2008 IMTS show in Chicago in September. Both China and Japan made presentations about their own machine tool shows, and both emphasized the strengths of the market in Asia.

At the same time, there was a look toward the Americas %%MDASSML%% in particular the United States and Brazil %%MDASSML%% for continued strength in the market. German turning and milling technology company DMG has invested heavily in the U.S. market, opening a technology center outside Chicago and planning to open an aerospace center of excellence in Chicago as well. So it was fitting that DMG leaders were in Chicago at the annual IMTS gathering at McCormick Place to discuss the company’s growth plan that counts on the Americas as a key factor.

Dr. Thorsten Schmidt, a DMG board member, told a press gathering that the machine tool market is on the rise for 2008, projecting 10% growth for the year. “The forecast for 2009 and 2010 is not as bright,” Thorsten said. “We see a certain cooldown in Europe. But especially in Brazil and in the U.S., we see an increase.”

Schmidt also said DMG is continuing its commitment to the U.S. market by locating a manufacturing facility in the U.S. That would be a first for the company. “Customers need to see their component on the machine,” Schmidt said. “We have not defined the state as yet. That is currently under review. We need to convince some of our key suppliers to join us. We need the local sourcing of parts.”

Representatives of the Chinese Machine Tool and Tool Builders Association said their country continues to lead the world in machine tool imports, which were up 34.5% in the first half of 2008. “It is expected that China’s machine tool and tools industry will be able to maintain a steady and fast growth pace in 2008,” said CMBTA vice president Wang Lining.

China has seen rapid growth in its aerospace, shipbuilding, automotive and power industries, all of which rely on precision machine tooling. In the power industry in particular, Wang said the country will build two 1-million kW nuclear plants a year for the next several years to increase total power output for the country. “Rapid development of the power industry demands a large quantity of highly reliable, large-scale and high rigidity CNC machine tools,” Wang said.

China is also pursuing greater international visibility for its machine tool industry. Its 2009 China International Machine Tool show ( ) will be held April 6-11 in Beijing, and the Chinese said they are anxious to welcome the world’s machine tool industry to China.

“China Machine Tool and Tool Builder’s Association is your trustworthy partner,” said Wang. “We will follow international norms to provide convenient and quality services to all participants.

“The Beijing 2008 Olympic games were a great success,” he added. “Inspired by the Olympic spirit, let’s enhance exchange and cooperation to realize the goal of all-win and common development.”

Kenichi Nakamura, chairman of the Japan Machine Tool Builder’s Association, said North America is a slightly smaller market for Japanese machine tools compared with Europe and Asia. “But the United States is still the biggest single export destination for Japanese machine tools,” he said. “Right now there is no change in the importance of the United States.

“If we look at the size of the orders from North America, we can see constant growth from the middle of 2004. This trend will continue at a high level,” Nakamura said. “I think this is because of the depth and broad scale of the North American market.”

Ahead of the Japan International Machine Tool Fair ( ) Oct. 30 through Nov. 4 in Tokyo, Nakamura said the sluggish global market has not pushed the machine tool business down too far. “For the past several years, the world machine tool market has performed well,” Nakamura said. “There may be some adjustment phases in the near future. But overall, I think there will be a trend of growth in the medium and long term.”

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me