The three overlooked words

The headlines blared in the June 8 newspapers around the country — GM to slash 25,000 jobs. The story went was that General Motors, which hemorrhaged money to the tune of $1.1 billion in losses in the first quarter of 2005, would eliminate manufacturing jobs at its U.S. plants, and would close older plants.

07/01/2005


The headlines blared in the June 8 newspapers around the country — GM to slash 25,000 jobs. The story went was that General Motors, which hemorrhaged money to the tune of $1.1 billion in losses in the first quarter of 2005, would eliminate manufacturing jobs at its U.S. plants, and would close older plants.

This was hardly welcome news for an economy looking to rebound, or for a manufacturing sector which has seen the solid growth of 2004 start to wane. Yet there was some buried in the story — something that didn't make it to the headlines — that everyone missed as the count begins toward 25,000 jobs.

Quoting from Rick Popely's story in the Chicago Tribune, "Nearly one in every five GM jobs in the U.S. would go away over the next three years, mainly through attrition."

Those last three words, "mainly through attrition," were barely a footnote in the coverage on the topic the next day. It means that while there will be GM workers laid off, the majority of the job cuts will occur when workers leave and those jobs aren't filled. Perhaps it's splitting hairs, but that's not quite the same as putting 25,000 workers on the street over the next three years against their will.

How many will be cut and how many will simply leave? That's what the next three years will tell us, though the company estimates about 6,000 workers retire or quit each year. How many displaced autoworkers may get scooped up by foreign companies such as Toyota, Hyundai and Nissan, which are expanding U.S manufacturing operations? Another unknown.

One thing we do know — as this month's cover story notes, manufacturers all over the country are concerned that there will be a severe shortage in skilled manufacturing workers coming within the next five years — mainly through attrition. While American manufacturing is losing skilled jobs in some parts of the country, it also needs skilled workers to fill jobs in other parts of the country. That's why PLANT ENGINEERING featured the subject this month in print and on our Website.

Programs such as the Dream It. Do It. campaign championed by the National Association of Manufacturers attempt to understand what the manufacturing sectors needs are and how best to address them. One major concern for young people looking to enter manufacturing is that it does not appear to be a stable career choice — especially when you read headlines that include the words 'slash 25,000 jobs'. Another is the lack of a clear career path for young people. A big concern is the issue of diversity — both in employees and in the types of jobs available in the manufacturing sector.

Manufacturing wants to build its reputation as a sector that values job stability and career growth. Dream It. Do It. is a laudable effort in that direction. Other regional manufacturing hubs — and manufacturers — can't wait for the program to show up before addressing this issue locally.

The other crucial issue is this: manufacturers face a shortage of skilled workers, even at a time of continuing job cuts. How do we match the displaced workers with the emerging opportunities?





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me