The shocking effects of an arc flash explosion

Most people tend to respect electrical equipment, but they may not understand the dangers that associated with it. One of those dangers is arc flash. In fact, the likelihood of injury from an arc fault is higher than injury from an electric shock.

09/20/2017


Most people tend to respect electrical equipment, but they may not understand the dangers that associated with it. One of those dangers is arc flash. In fact, the likelihood of injury from an arc fault is higher than injury from an electric shock.Understanding more about arc flash, including what causes it and what effects take place when it occurs, helps you to respect and avoid it. Image Courtesy: L&S Electric.

Understanding more about arc flash, including what causes it and what effects take place when it occurs, helps you to respect and avoid it.

What is an Arc Flash?

An arc flash (flash over) is the result of an arc fault and is the visible part of the fault, resulting in heat and light. It occurs when energy is rapidly released and travels from one phase Busbar to another phase Busbar, or from a phase Busbar to the ground. During an arc flash, the air acts as a conductor.

The most common reasons for flash are either human error or a failure of the equipment such as insulation failure, poor maintenance, etc. Arc flash occurs more often when equipment is operational, or there are nearby active repairs. It is not always possible to predict when a flash is going to happen and more than likely, it happens without warning. That is why learning more about arc flash reduces its possibility.

Results of Arc Flash

There are several ways to be injured as a consequence of a flash. Here are a few examples.

Burns

One of the most common results of a flash is burns. When it arc flash occurs, the heat reaches more than three times the temperature of the surface of the sun. Although the arc fault that led to the flash burns itself out very quickly, the energy discharge results in a release of energy that burns everything in its path.

Light and Noise

Along with high levels of heat, the light from the flash also damages eyesight. The intense light flash leads to blindness in some cases. The sound of the flash is also enough to cause hearing loss or damage as well.

Shockwave

The force of the explosion knocks a person off of their feet. If they are on a ladder or scaffolding, it causes them to fall. More injury results from the shrapnel associated with the flash.

Gases

Another consequence of a flash is poisonous gases. If inhaled, this may lead to lung damages in some cases.

In Sum

Understanding the cause and effect of arc flash helps reduce the possibility of the problem occurring. It is also important to know the danger zones and to wear the appropriate PPE if you are in the area.

Conduct a survey of your facility to determine where those risks exist. These surveys minimize the possibility for a flash or flash injuries.

David Manney, content marketing, L&S Electric. This article originally appeared on L&S Electric's website. L&S Electric is a CFE Media content partner.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me