The next manufacturing goal is within our reach

08/01/2014


It is called football in a myriad of local languages by the rest of the world, while Americans call it soccer. This is typical of Americans; the rest of the world had football before we had our game called football, which is not much like the game the rest of the world calls football. For one thing, our football very rarely uses the foot.

We call it soccer, but by any name, when the 2014 World Cup kicked off in Brazil, we Americans were there by the millions in front of our TV sets, gathered in our local watering holes, in public viewing places, and in airport lounges. There it was on the front page of our newspapers and the lead story on our news websites, and there it was crashing the streaming Website ESPN had set up for mobile viewing. Even though 19 World Cups have preceded it, the U.S. sports fan, and even the casual fan of sports, embraced the 2014 World Cup.

Maybe this time its popularity was because the event was roughly in the same time zone as we are and we didn’t have to wake up at 8 a.m. or stay up until 2 a.m. to watch the games. Maybe it was because the U.S. team was given a reasonable chance to advance in the tournament, and Americans don’t follow sports we don’t have a reasonable chance to perform well in (i.e., the biathlon, cross-country skiing, and most marathons in the last 30 years).

Whatever the reason, we caught World Cup fever, and this time, it may not just be a passing infatuation. Even though the U.S. bowed out in the round of 16 to Belgium on July 1, the fervor over who would win the final continued past that date. More people in the U.S. watched that U.S.-Belgium match than watched any game in the 2014 NBA Finals between Miami and San Antonio or any 2013 World Series game between Boston and St. Louis.

One illusion at the World Cup is that this is what soccer looks like around the world. Not every soccer field is the finely manicured pitch that greeted the players in Brazil. In many places the field has no grass at all; it’s just a barren patch of dirt. Many times it isn’t grass or dirt, but the gravel or pavement of an inner city street. The shoes, if the players have shoes, don’t have swooshes or stripes. And if they don’t have shoes, they play without them. But the goal is the same.

One world; one goal. It’s easy for us to lose sight of this simple idea in a world where few things seem that simple. But in soccer and in manufacturing, it is that simple. We have one world in manufacturing; one shrinking, interconnected, and increasingly complicated world. We have one goal: great manufacturing output, produced with high efficiency and high quality. No matter the size of your operation or its location, the goal is the same.

In the iconic American sports movie “Hoosiers,” the small-town Indiana basketball coach played by Gene Hackman takes his team into Hinkle Fieldhouse at Butler University in Indianapolis for the state finals. As the players look in awe at an arena that seats more people than live in their town, Hackman’s character pulls out a tape measure and reminds his team that the baskets are still 10 ft off the ground, that the free-throw line is still 15 ft away. He reminds them that no matter where they are, the game is the same.

As the World Cup showed us, the margin between success and failure often is tiny, almost imperceptible. In four World Cup games, the U.S. scored five goals and still were just one goal away from a berth in the quarterfinals. Costa Rica scored five goals in five games, and just two in its final four games, and still almost made the semifinals.

Success is measured in different ways. For the U.S. team, it was that they were competitive on the global World Cup stage, that they had gained respect as a potential global soccer power. It is worth noting that their coach, Jurgen Klinsmann, is a German native whose country has won three World Cup titles. Klinsmann was brought in to help the U.S. national team raise its game to the level of the rest of the world. We can learn from the success of others.

There are many ways to get to the next goal in manufacturing. There is not a single path to manufacturing excellence. But there are best practices, things all good manufacturers measure and manage. It is the fundamentals, practiced and refined and perfected every day, that lead a team, any team, toward the opportunity to be successful.

As it will be for the U.S. national team in soccer, the next goal for manufacturers is to improve on this year’s success. The next goal is within our reach. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me