The key to Keystone? Just build it right

Keystone XL is an economic issue, and an environmental issue, and a political issue. Before any of that, however, Keystone XL is an engineering issue.

06/03/2014


In the continuing debate over the proposed Keystone XL pipeline, there really are just two sides. You either favor building it, or you favor shelving it. The debate is black and white, left and right, pro and con. You either can see the economic benefit and believe the environmental impact can be managed, or you believe the environmental risk is simply too great, no matter the economic benefit.

And if that’s all I had to say on the topic, or if that’s all there was to the topic, there’d be a lot of white space at the bottom of this page. But I don’t. And it isn’t. And there won’t be.

The pipeline, stretching more than 2,000 miles from the oil sands of Canada to the Gulf of Mexico, has generated debate and delay since it was first proposed, and the hard lines that have been drawn over this project simply harden as time passes.

One fact that is little understood is that three phases of Keystone already are in operation. Phase 1 extends from the Hardisty Terminal in Alberta east through Saskatchewan and Manitoba, then south through the Dakotas and terminating at Steele City, Neb., and then east again through Missouri to Wood River, Ill. Phase 2 connects Steele City and Cushing, Okla., and Phase 3 runs from Cushing to Houston and Port Arthur, Tex.

The proposal for Phase 4 would essentially eliminate the Phase 1 routing and cut the corner by going almost straight southeast from Alberta through Montana, South Dakota, and western Nebraska to Steele City.

Keystone XL is an economic issue, and an environmental issue, and a political issue. Many people I talk to in our industry see it as a manufacturing issue as well. Before any of that, however, Keystone XL is an engineering issue. That’s the part of this debate that is widely overlooked, yet it is to me the most crucial part of the debate. So I quietly offer this idea, and wait for the e-mail box to load up with the responses:

Let’s not build Keystone XL. Let’s build Keystone XL right, the first time.

The immediate howls from the environmental supports suggests that it can’t be done, that we can’t trust that it will be done, that there is no way to build such a project so that it will have no impact.

The Keystone supporters will sit back and appreciate someone coming out with some kind words about this project, given all the protests about it to date, and given the lack of leadership from anyone east of the Potomac on this project.

And you’re both wrong. The key word is to build it right. Right is not fast or cheap or environmentally insensitive. It will cost more than the projected $7 billion that it will take to build Keystone properly, and those who support the project had better be prepared to come to the table with that additional money, not as a gesture of good will or good faith but because they are absolutely, unfailingly committed to building it correctly and are prepared to unflinchingly demonstrate how that can happen.

And given that commitment, those with legitimate environmental concerns must be willing to see that commitment, understand the parameters of such a project on both sides, and also unfailingly understand that “right” does not mean “perfect” or “infallible.”

We have faced such challenges before. The Interstate Highway system wasn’t really started until 1956 when President Eisenhower saw the benefits of the system and signed the enabling bill into law. It was built over the next 36 years, and while it still undergoes changes (our readers in Charlotte and Atlanta can attest to that), the basic system connects most everyone in the contiguous U.S. with most everyone else along one more or less continuous highway system. Yes, it was done well, but it was not perfect. In the end, though, it has been essential to our economy, our national defense (one of the understated reasons the system was created), and our ability to see America from behind the wheel of our car.

While all this was going on, we tackled a far more daunting project in the 1960s when President Kennedy challenged America to send a man to the moon by the end of the decade. In his famous 1962 speech on the topic, Kennedy said, “We choose to go to the moon in this decade and do the other things, not because they are easy, but because they are hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win.”

For me, there are no words which so completely sum up my America as those. We always should strive to do great things, to marshal our efforts toward great achievement. We have before. We can again.

So build the pipeline. Just build it right.


Files:
Bob_Vavra.bmp120 Ki

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me