The future is looking bright for residential lighting control

Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space.

07/09/2012


In the past, having remote-controllable lighting in the home was something seen mainly in movies, and owned by only the few who could afford such a system. However, this is all about to change. Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space, at the right price point for consumers to take advantage of.  

Insteon has announced the release of an 8-W networked LED light bulb which features dual-band technology, meaning it can transmit over a building’s existing wires (powerline) or via wireless communication. These LED light bulbs can fit into traditional light fixtures, are fully dimmable and can be controlled by a remote control that is included in the package. Alternatively, with the use of an Insteon gateway, the system can be controlled by other devices such as smart phones or tablets. These light bulbs cost as low as $29, which puts them below the price of some standard LEDs.

I first saw light bulbs with integrated connectivity technology at Smart Lighting 2012 when I saw a demonstration of Greenwave Reality’s RF-enabled CFL and LED light bulbs. These light bulbs use NXP’s JenNet-IP wireless technology to connect the bulb to a dedicated remote, or again to a third-party device such as smart phone, when utilizing a gateway.

The great benefit of these systems is that they can be fitted into traditional lighting fixtures and only require the shipped remote for advanced control. This minimizes the cost implications that most consumers would have to endure when fitting systems that require new fixtures. With full lighting control at an appropriate price point, and in the form of a traditional light bulb with installation requiring no other skills than screwing it in to the fixture, advanced lighting controls will available to even the least ‘tech savvy’ people.

With solutions such as these, you will never find yourself dwelling on the question “did I remember to turn off the lights?” as the answer will only be a few clicks on your smart phone away.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me