The cloud's role in data management

The connectivity of devices that use the Industrial Internet of Things (IIoT) must collect and analyze lots and lots of data.


The connectivity of devices that use the Industrial Internet of Things (IIoT) must collect and analyze lots and lots of data. Courtesy: GE Automation & ControlsBillions of sensors all around the world are making consumer devices smarter, safer and more efficient. Wearable products have revolutionized our understanding of wellness by providing more information about our daily health. Appliances and systems in our homes now are connected and make intelligent decisions to enhance our lives. Entire cities now are employing big data and sensors to prevent crime, manage crowds, reduce energy use, and much more.

The connectivity of and communication between these devices, as we know, is referred to as the Industrial Internet of Things (IIoT). But before these devices can start communicating with end users and each other, they must collect and analyze data—lots and lots of data.

Data for many of these devices is collected, stored, and analyzed in cloud-based environments such as the Amazons and Googles of the world. Even our Fitbit trackers have a cloud where our health analytics are stored. While there's a lot of data gathered from consumer products, there's a much larger amount of data found in industrial machines and an even greater need for the same type of connectivity and analytics. IIoT will increase efficiencies, reduce costs, and improve employee health and safety while generating new revenue streams for businesses.

Controls have been managing machines all around us for centuries. Just as our machines have evolved, so, too, have the analytics our machines provide. However, the data those machines collect and analyze, up to this point, has been limited to the memory of internal computers running at or inside the machine; the intelligence of those machines essentially has been limited to that memory.

New industrial control systems now are providing the same type of connectivity, communication, and analytics for our industrial assets as consumers have seen for several years. These connected controllers and systems not only run our machines like they used to run, but they also now have the capability to create an outer loop and custom applications that gather data in real time and advise the controller to make more intelligent decisions. Just as connected sensors and wireless devices transport data to consumer clouds, the vehicles to transport big data to the industrial cloud are edge devices and sensors in or near machines.

Many machines and plant systems don't offer the type of connectivity and deep analytics today's industry demands. These machines require third-party solutions to gather data and provide critical analytics. The more data gathered, and the closer to the machine you run data, the more accurate and intelligent the decisions the machine makes.

Some machines can't be reached with traditional Ethernet cables because of the distance between the internet source and the machine. Not only would it be cost prohibitive to drop and run that wired connection, but the proximity would make data gathered less favorable. Connecting to these machines wirelessly makes sense.

Cloud-based, wireless solutions provide greater flexibility than wired solutions. The cloud empowers the elasticity of data storage and performance and is not subject to the constraints typical of a local computer. Connecting to the cloud also enables a fleet of machines to be managed and to communicate with each other, providing thorough analytics for the entire fleet. For example, there's an app that leverages the power of the industrial internet, connects to a fleet of wind turbines and enables them to coordinate the speed and direction of their blades to maximize the wind farm's overall energy output.

However, the cloud is not always a viable option due to latency, costs, regulations, and other factors. Think also about the criticality of the data being analyzed. If a self-driving car was required to go to the cloud to make important decisions, the car's response time would be too slow. Industrial assets are the same way. Some things can be done in the cloud, but other problems need to be analyzed as close to the machine as possible. Digital industrial companies are developing products that are designed to work on the industrial edge and make collecting, storing, and analyzing data easier and more accurate.

Three years ago, we couldn't have imagined IIoT as it is today. Similarly, we can't speculate on where it will be three years from now. The rate at which things are changing makes it difficult to recommend specific assets or systems that should be hard-wired or should be wireless or which apps should run in the cloud versus at the industrial edge, so it's important to think the process through strategically and go the route that makes the most sense for your plant.

Rebecca Boll is general manager, sales for GE Automation and Controls.  

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me