The challenges of maintenance planning

7 tips to get the most out of your process and people

01/26/2012


Excerpted from SMGlobal’s Maintenance Software Blog

Planning maintenance work can be a challenge because it normally consists of two different types of maintenance:

  • Unplanned or emergency maintenance to fix equipment breakdowns or other urgent work as it comes up
  • Planned or preventative maintenance to keep systems/equipment running in peak condition

How does one consolidate and manage these two types of jobs? How can one allocate maintenance technicians and work hours in the daily calendar to get both types of work accomplished? Many maintenance programs have grown organically over the years and end up mainly doing breakdown/ unplanned maintenance. Technicians work in fire fighting mode and preventative planned maintenance typically takes a hit. Not doing preventative maintenance on time (or not at all!) results in further unexpected equipment breakdowns and further emergency maintenance work.

Maintenance Planning Tips

  1. Since unplanned/ breakdown maintenance by its very nature is unpredictable, try to build in buffer time to handle such work. Break each day or week into periods for planned maintenance based on category A (must be done), B (should be done sometime soon) and C (nice to do). Unplanned maintenance can be scheduled as needed around time for category C or even category B maintenance. This can help prevent cascading maintenance issues and associated continuous firefighting.
  2. Make sure to allot enough time and resources for regular preventative maintenance in the maintenance plan
  3. The operating principle when handling any large multi-day, multi-team maintenance job should be “divide and conquer”. Break the whole job down into separate tasks that can be done by different teams or personnel. Here a good CMMS program can help you split the job into separate tasks and “chain” them together so that each sub-task is completed when the prior one is done
  4. Get a good maintenance management software product (CMMS software) that will help you manage both unplanned as well as planned maintenance in a single interface.
  5. Remember that estimates should be based on the person who will be doing the job not on the experience of someone who may be an expert at this job. Inexperienced personnel will take more time to complete many jobs. Having unrealistic estimates will cause backlog and can completely ruin an otherwise well thought out maintenance plan.
  6. When making maintenance plans build in time for recording, updating & reviewing information. Otherwise these elements will be the first to be skipped.
  7. Put together a maintenance calendar of work to be done in the next month, quarter or year by equipment/ and location. This can be useful to show & discuss with production/ operations managers. Items may need to be rescheduled or grouped together to reduce the time equipment is unavailable due to maintenance work or identify conflicts due to production/ operations deadlines. This is another area where a good CMMS/ maintenance software can help since it makes it easier to reschedule and move around jobs.

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me