The challenge: Build sub-meters and we will buy them

Dept. of Energy wants all the sub-$100 meters we can manufacture to cut energy consumption

06/06/2013


A coalition that includes the U.S. federal government and over 200 major commercial building sector partners has issued a simple challenge to U.S. manufacturers: If you can build wireless sub-meters that cost less than $100 apiece and enable us to identify opportunities to save money by saving energy, we will buy them.  

A group of at least 18 manufacturers has already agreed to take up the challenge, pledging to produce devices that will meet the specifications outlined by the U.S. Department of Energy and its private sector partners that have signed letters of intent to purchase the wireless sub-meters. 

“This is a perfect example of how government can team up with industry to identify a problem and promote the innovation needed to solve it,” said U.S. Energy Secretary Ernest Moniz. “Affordable, accurate sub-metering of electricity use will give building managers the critical information they need to find and eliminate waste that hurts their businesses and costs billions of dollars a year. Even a small improvement in efficiency will mean huge savings for companies as well as for taxpayers.”

Electricity sub-meters don’t save energy by themselves, but they provide building operators with the information they need to identify opportunities for savings. For example, a large commercial building might pay $10,000 a month or more for electricity, but not have any way to detect which systems are consuming the most electricity.  

A wireless sub-meter could be installed at various electrical panels throughout the building to give a more detailed picture of where the electricity is being used, helping to identify savings. It might also allow commercial building operators (at a strip mall, for example) to bill individual tenants for their electricity usage, creating an incentive for energy efficiency. Wireless sub-meters are available today, but typically cost about $1,000 per installation, so the goal is to reduce the cost by about 90%. 

The Energy Department worked with members of its Better Buildings Alliance and Federal agencies to develop a performance-based manufacturing specification. The specification recommends minimum performance requirements for one or more multiple wireless measurement devices, or sub-meters. The metering system addresses energy consumption; measuring and monitoring granular electric energy consumption data at the panel-level to support the implementation of energy efficiency improvements. The Department’s Washington, D.C. headquarters, the James A. Forrestal Building will be used as a testing facility. Energy data will be collected from within the facility’s eight occupied floors, basements, and 1,754,800-square feet of floor space.

Partners that have signed letters of intent expressing interest in purchasing the meters include:

  • Bullitt Foundation
  • CBRE
  • Enterprise Green Communities
  • Fitzmartin Consulting
  • Jonathan Rose Companies
  • McKinstry
  • Natural Resources Defense Council
  • Prologis
  • Stanford University
  • University of California – Berkeley
  • University of Maryland Medical Center
  • U.S. Federal Energy Management Program
  • U.S. General Services Administration
  • Vermont Energy Investment Corporation
  • Whole Foods Market
  • Yum! Brands

Participating building sensor and controls manufacturers have committed to producing cost-effective wireless building metering systems through a signed letter of intent, and the Department will offer third party verification that the wireless building metering systems meet the performance specifications. These manufacturers include:

  • BLUEdev
  • Continental Controls—Micro Strain
  • Dent Instruments
  • Eaton Corporation
  • Energy Aware Technologies
  • Energy Detective
  • IE Technologies
  • Ingreenium
  • Inoscope International
  • Lem
  • Leviton
  • LoadIQ
  • Negawatt
  • Obvius
  • Powerhouse Dynamics
  • Schneider Electric
  • Smart OES
  • Universal Devices

While energy usage and energy intensity varies widely based on the size and usage of the building, the U.S. Energy Information Administration’s survey of U.S. commercial buildings found that in 2003, commercial buildings spent roughly $1.15 per square foot of floor space.  That would mean that a 100,000 square foot commercial building – the size of a typical big-box store, for example – might have an electricity bill of over $100,000 a year.  

The same survey found that the largest commercial buildings (those with over 500,000 square feet) had electricity bills exceeding $1 million a year.  Even a small increase in building energy efficiency can help a business improve its bottom line and become more competitive.  

Nationwide, the Department of Energy conservatively estimates that if commercial buildings could utilize sub-meters to identify energy savings of just 2%, it would represent actual cost savings of $1.7 billion. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me