The 1997 economy -- as good or better than "the good old days"

What an extraordinary year 1997 was for the U.S. economy. A year ago, the "Blue Chip" consensus panel forecast called for GDP to grow only 2.2% during 1997 (we were marginally more optimistic, looking for 2.3% growth).

01/01/1998


What an extraordinary year 1997 was for the U.S. economy. A year ago, the "Blue Chip" consensus panel forecast called for GDP to grow only 2.2% during 1997 (we were marginally more optimistic, looking for 2.3% growth). It now appears that the year's gain in real GDP totaled 3.7%.

Even the most bullish of the 50+ forecasters in the consensus panel were expecting economic growth to just reach 3%. At the same time, most forecasters overestimated the degree to which inflation would re-emerge -- and were surprised by the low level of producer and consumer price inflation. Many forecasters did, however, correctly anticipate incipient wage inflation pressures.

Who would have believed that after more than 7 yr of uninterrupted economic expansion, we'd get growth that exceeded even 1994's gain, that inflation would remain under control, and that the unemployment rate would be stuck in the -5% range?

No, we don't think that history will repeat itself in 1998. "Asian Contagion" seems sure to sap the U.S. economy of some of its vigor. We're looking for a pronounced slowdown in economic growth during 1998. GDP will rise by an inflation-adjusted 2.3% this year, down from the heady 3.7% gain of 1997. Interest rates should be somewhat higher in 1998, as the Federal Reserve Board pursues a marginally tighter monetary policy.

Three major trends bear watching this year, and all will have a moderating influence on the economy's growth potential. First, business investment spending will slow. Second, consumers will continue to bear a high level of debt, particularly installment (credit card) debt. And third, low levels of unemployment and the resulting increased wage demands will cause an uptick in inflation. None of these factors alone is significant enough to cause the U.S. economy to stall out in 1998, but we'll be watching developments with a wary eye.

Economic expansion will continue into 1998

(Annual change, %, real GDP)*

1997 1998

Total 3.7 2.3

Consumer spending 3.2 2.5

Durables 5.2 4.5

Nondurables 2.1 1.8

Services 3.4 2.4

Business investment 10.3 6.4

Structures 4.5 3.8

Equipment 12.4 7.1

Exports 12.5 8.3

Imports 14.2 7.2

Government spending 0.9 1

*1997 estimated based on three quarters of data; 1998 forecasted by Reed Elsevier Business Economics





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me