Technology consumption shows slight rise in July

AMT report shows 9.2% increase from June, but year-to-date is still down 68%

09/14/2009


July U.S. manufacturing technology consumption totaled $149.51 million, according to AMTDA, the American Machine Tool Distributors' Association, and AMT - The Association For Manufacturing Technology. This total, as reported by companies participating in the USMTC program, was up 9.2% from June but down 55.3% from the total of $334.14 million reported for July 2008. With a year-to-date total of $910.42 million, 2009 is down 68.3% compared with 2008.
These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.
"We are pleased to see a third consecutive monthly increase in machine tool sales which indicates that we appear to be past the bottom," said Peter Borden, AMTDA President. "However, we are well aware that the number of units is still far less than half of what it was a year ago. We are hoping the recent uptick will pave the way to a more solid recovery in the fourth quarter and into 2010."
The United States Manufacturing Technology Consumption report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.
U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region
Northeast Region manufacturing technology consumption in July stood at $19.61 million, down 26.8% when compared with June's $26.78 million and down 61.4% when compared with July 2008. With a year-to-date total of $174.39 million, 2009 is down 57.3% when compared with 2008 at the same time.

Southern Region
July manufacturing technology consumption in the Southern Region totaled $21.82 million, 13.5% less than the $25.23 million tally for June and off 49.8% when compared with July a year ago. The $128.67 million year-to-date total is down 71.7% when compared with the same period in 2008.

Midwest Region
Midwest Region manufacturing technology consumption in July rose to $39.35 million, 9.4% higher than June's $35.96 million, but 57.6% lower than the total for July 2008. At $255.36 million, 2009 year-to-date is off 73.3% when compared with last year at the same time.

Central Region
At $50.87 million, July manufacturing technology consumption in the Central Region was 76.4% more than June's $28.83 million but 53.5% less than the total for July a year ago. With a year-to-date total of $227.04 million, 2009 is off 68.0% when compared with 2008 at the same time.

Western Region
Totaling $17.87 million, July manufacturing technology consumption in the Western Region was down 11.4% from the $20.16 million total for June and down 52.4% when compared with July 2008. The $124.95 million year-to-date total is 63.6% less than the comparable figure for 2008.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me