Technology checklist for oil tool automated assembly

A machine vision robotic assembly application for an oil tool industry manufacturer used the following technologies. See related application article.

04/19/2012


The following technologies were used in a machine vision robotic assembly application for an oil tool industry manufacturer. Read the application details in this related article: Vision-guided robots automate oil tool assembly, linked at the bottom of this file.

Two robots work together, with the threader on the left and the bin picker on the right. Courtesy: Cognex, JMP Engineering

System integration: JMP Engineering: In addition to hardware integration, JMP programmers wrote a graphical user interface for the workcell in Microsoft Visual Basic that performs vision operations by calling vision tools.

Machine vision camera: Basler Ace camera attached to the second robot locates the pipe for thread protector installation.

High-speed vision communication standard: GigE Vision from Automated Imaging Association (AIA)

Control: Frame grabber card on a Beckhoff Automation industrial personal computer.

Lighting: Tectivity light emitting diode (LED) inside the camera enclosure for red lighting to help overcome ambient lighting to capture the image.

Brick Red Light from Smart Vision Lights shines on the pipe at an oblique angle to create a shadow that enables accurate measurement of the pipe diameter.

Screen capture shows a Cognex VisionPro picture of the thread protector bin. Courtesy: Cognex, JMP EngineeringMachine vision software: Cognex VisionPro library, which provides preconfigured, tightly integrated acquisition support for the complete range of industrial cameras and video formats. The QuickBuild application development environment makes it possible to configure acquisition tools, define vision tasks, and make pass/fail decisions without any programming. The VisionPro library includes Cognex tools such as PatMax, PatInspect, PatFlex, IDMax, and OCVMax that gauge, guide, identify, and inspect parts despite variations in part appearance due to the manufacturing process. Cognex PatMax geometric pattern matching technology learns an object’s geometry using a set of boundary curves that are not tied to a pixel grid and then looks for similar shapes in the image without relying on specific gray levels. The result is a significant improvement in the ability to accurately find objects despite changes in angle, size, and shading. Cognex VisionPro circle tool is used to check the diameter of the pipe to ensure it matches the thread protector and also more accurately determine the location of the pipe.

Robotics: Two Motoman HP50 multi-function robots with 55.2-in horizontal reach and 80 kg payload capacity: One moves the camera above the bin and signals that it is in position to take a picture of the bin. It hands the part to a second Motoman HP50 robot that applies the thread protector to the pipe.

Technology and service supplier URLs

www.baslerweb.com/products/ace.html

www.cognex.com/VisionSoftware

www.jmpeng.com/whereweexcel/automationsystems

www.microsoft.com/visualstudio/en-us/products/2010-editions/visual-basic-express

www.motoman.com/products/robots/models/HP50-80.php

www.smartvisionlights.com/products/brick-spot-light

www.tectivity.com/videomod.htm

www.visiononline.org/vision-standards-details.cfm?type=5 (AIA GigE)

- John Lewis is market development manager, Cognex Corp. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me