Taking the longer view

Practical energy sustainability for industry

04/16/2013


We’ve heard the wry comment, “When you’re up to your neck in alligators, sometimes you forget that your mission was to drain the swamp.” Aside from the general inadvisability of destroying wetlands, the comment reminds us that often short term needs can distract us from laudable long term goals such as working harmoniously, conserving natural resources, or offering lasting value to customers. Certainly this challenge is one faced by industrial process and energy managers. The effects of prudent long-term energy management sometimes create conflict with short term bottom-line targets. 

Energy Improvements a Hard Sell?

In these pages from time to time we have discussed significant opportunities for major energy savings with simple paybacks of three, five or seven years. We know from experience that these steps are sometimes difficult to accept or sell if they will negatively affect immediate profitability. A recent presenter at a Technology & Market Assessment Forum sponsored by the Energy Solutions Center discussed this challenge, and provided perspectives on where the future may lie. Russ Chapman from Firebridge, Inc., an Ontario-based combustion engineering firm, gave some views on the topic.

Chapman noted the value proposition for the broad concept of sustainable industries – those that can thrive long-term by balancing the needs of people (both employees and customers), the environment and the business.  This challenge is both acute and obvious in decisions involving energy. A decision not to adopt energy-conserving equipment and processes might lead to a better short-term bottom line, but likely will lead to a longer-term lack of competitiveness, thus adversely affecting customers and employees, while adding to the excessive depletion of resources, and  environmental damages.

Paybacks are Possible

Chapman gave as an example Dow Chemical, which has reported that by investing less than $2 billion to improve its resource efficiency since 1994, it has accumulated savings of over $9.8 billion by reducing waste of bothwater and energy in its manufacturing processes. By this process and by integrating other environmental, safety and health-related goals into its processes, it has maintained global competitiveness and has surpassed Kyoto Protocol greenhouse gas emission targets.

The presentation stressed the influence of appropriate energy resource decisions on industrial corporation risk management, and on reducing exposure to any effects from emerging environmental regulation. As an example he cited mining giant BHP Billiton, which managed its exposure to future regulations by proactively reducing its emissions.

Chapman suggests that a strong case can be made for taking the longer view. Financing instruments are available that repay the cost of energy improvements with savings. Once the project is amortized – perhaps three to five years – the savings drop to the bottom line.  He also stresses that greenhouse gas emission restrictions will likely make these improvements inevitable, so why not begin to capture the savings today?

Further, he feels that savings in site productivity, product quality and workplace safety often accompany these facility improvements. Correctly selected, and innovatively financed, needed energy improvements can even begin showing on the bottom line immediately. Taking the longer view can also mean taking the smarter view.

More Info:

ESPRC Centre Sustainability Information

Energy Solutions Center Industrial Efficiency

Firebridge



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me