Take care in interviewing disabled job applicants

On one hand, you want to be a "good guy" and do the "right thing." On the other hand, you have an operation to run. Work has to get done properly and on time. Productivity standards must be maintained.

11/01/1998


On one hand, you want to be a "good guy" and do the "right thing." On the other hand, you have an operation to run. Work has to get done properly and on time. Productivity standards must be maintained. So what's a manager to do?

Above all, combine care with compassion, as Engineering Project Supervisor Harry Rose learned the hard way. Studying Bill Daly's job application form, Rose reached two conclusions: 1. The applicant was well qualified for the maintenance planner's job for which he had applied. 2. Judging from a variety of other factors, he was probably gay. Which, Rose believed, shouldn't be a factor in the employment decision. Qualified was qualified.

What concerned the supervisor was the possibility that Daly might have AIDS, a disease that is more prevalent in the gay community. He thought Daly didn't look healthy. But looks can be deceiving, and Rose wasn't a medical expert.

So we're back to the what-to-do question, Rose thought. He couldn't very well ask Daly if he was gay. And it would be discriminatory to come right out and ask if he had AIDS. On the other hand, Rose thought, maybe he could get around it by asking the applicant what prescription drugs he was currently using. Daly reacted to the query with anger and indignation.

"That question violates the Equal Opportunity Commission guidelines. I could sue you for that. In fact, I think I will."

Rose was stunned by Daly's reply and didn't know quite how to respond.

Question : What do you think? Did the applicant have a right to make the threat?

Walker's verdict: "Yes, he did," Plant Engineer Tom Walker told Rose when he asked him the question. "You can't be too careful when interviewing job applicants with a real or suspected disability. It's acceptable to inquire into a person's ability to handle a job or describe how he would perform it. But inquiry into the state of his health, subtle or not, can be tricky. Your question about drugs is a good example. It doesn't pass muster. When in doubt, your best course is to consult the personnel or legal department."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me