Sustainable manufacturing will attract customers, UL study finds

Study takes a global view of the relationship between consumner expectations and manufacturing production

01/17/2012


What’s the direct relationship between consumer expectation and manufacturing production? That’s the question Underwriters Laboratories set out to discover when it launched its “Navigating the Product Mindset” study in 2011.

 

“In general, Navigating the Product Mindset was meant to provide thought-provoking insights to all members of the product supply chain with the end goal of helping all stakeholders create and consume safe, innovative, reliable, and sustainable products,” said Sara A. Greenstein, senior vice president and chief marketing and strategy officer for UL. “We look forward to continued dialog with industry thought leaders on the ideas generated from this study.”

 

Among other achievements, Ms. Greenstein helped to expand UL’s footprint in Japan, India and China.  She established a joint venture in China and continues to serve as a trustee on the venture’s Board of Directors. She discussed the study’s details (a copy of which can be found by searching for this story at www.plantengineering.com) with Plant Engineering.

 

 

 

PE: One of the more interesting parts of the study is that consumers have a different view on component parts as it relates to product safety than do manufacturers. Why is there this disconnect?

 

Greenstein: It’s clear from the study that consumers are becoming more interested and savvy about products, and not just about the assembly of their products, but about the components of their products. A holistic view of the data leads one to presume that consumers are becoming more aware of the global supply chain’s complexity, and with that, how component parts impact the quality and safety of a final product.

 

Added to that is the power of social media and the Internet. Consumers have greater access to uncover the details surrounding products’ components. Manufacturers could view this as an opportunity to differentiate their products by informing consumers about component parts.

 

 

 

PE: Product quality – and by extension manufacturing quality – is an important issue for both manufacturers and consumers. Is there a sense that product quality has declined in recent years?

 

Greenstein: No, quite the opposite. The study says that more than half of all consumers perceive product quality to be better today than five years ago in all categories (with high tech having the highest response and processed food the lowest), and Chinese and Indian consumers are the most positive about product quality today versus five years ago.

 

So, in general, confidence in product quality is quite high, among both consumers and manufacturers. It is interesting to note despite the perceived improvement in product quality, on average 76% of all consumers feel manufacturers do not use the best materials in their products,

 

 

 

PE: There surely is a perceived innovation gap between the developing markets, such as China and India, and the developed markets of the U.S. and Germany. Is perception reality in this case? How do the developed markets recapture that push for innovation?

 

Greenstein: There are many possible ways to interpret the data on this topic. Speed to market ranks low among Chinese manufacturers. (30% of Chinese manufacturers rank innovation first and only 4% rank speed to market most important). This may be because the majority of Chinese manufacturers already have strength in making products cost effective, efficient and dependable rather than in advancing technology. The competitive and fast-growing climate in China may be a key reason why innovation is currently so prized there.

 

Another interpretation is that U.S. manufacturers rank the four competitive factors (reliability, safety, speed to market, and innovation) more evenly because all of these factors are viewed as equally essential to U.S. manufacturers. UL will conduct this study annually, and it will be interesting to see if these priorities change with time and across countries.

 

The full interview with Sara Greenstein will appearin Plant Engineering’s Forecast issue, which will be published in mid-February. To receive the digital edition of Plant Engineering in time for the Forecast issue, which also will feature the 2011 Plant Engineering Salary Survey, click here:



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me