Survey of economic activity

Equipment Leasing and Finance Association's Monthly Leasing and Finance Index showed overall new business volume for February was $4.1 billion, up 28 percent compared to the same period in 2010

03/24/2011


The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity for the $521 billion equipment finance sector, showed overall new business volume for February was $4.1 billion, up 28 percent compared to the same period in 2010. Measured against the prior month, February volume was down a tick. And, it is worth noting that only 10 percent of responding organizations reported declining volume activity when compared to the year-earlier period.

Credit quality continues to be mixed. Receivables over 30 days increased to 3.1 percent in February from 2.8 percent in January, but declined by 47 percent compared to the same period in 2010. Charge-offs increased slightly, from 0.9 percent in January to 1.0 percent in February, but showed dramatic improvement over the same period in 2010.

Compared to the year-earlier period, credit standards eased as new application approvals increased to 76 percent in February. And, 61 percent of participating organizations reported submitting more transactions for approval during the month, up from 56 percent of responding organizations in January.

Finally, total headcount for equipment finance companies remained flat for the last four months, but was down four percent year-over-year. Supplemental data shows that the construction and trucking sectors once again led the underperforming sectors in February.

Separately, the Equipment Leasing and Finance Foundation's Monthly Confidence Index (MCI-EFI) for March is 72.4, a new high since the MCI was launched in May 2009, and an increase from the previous high of 71.6 in February.

ELFA President and CEO William G. Sutton, CAE, said, “Both performance indices—the MLFI and MCI—show reasons to be optimistic about the equipment finance sector as the economy slowly recovers and the demand side of the capital investment equation picks up steam.”

Speaking from the healthcare equipment finance perspective, ELFA member James Cress, Director of Operations, Stryker Finance, located in Kalamazoo, MI, said, “Demand for healthcare equipment financing in the beginning of the year has been softer than anticipated, but we believe that growing pipelines, combined with an increase in new construction and renovation, indicate that demand is picking up.”

Cress added, “The abundance of cash in the marketplace, along with continued uncertainty tied to regulation, healthcare reform and the global economy, is creating increasing pressures on finance companies. However, these challenges are driving more innovation of financial products by the industry to meet the needs of our customers in more creative ways.”

www.elfaonline.org

Equipment Leasing and Finance Association

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me