Survey: Hiring, cap ex spending to keep rising

Prime Advantage report shows room for growth, concern over material costs

05/01/2012


The ninth semi-annual Group Outlook Survey, published by Prime Advantage, shows the majority of its members are forecasting revenue increases and planning to hire more employees.

Solid revenue and capital expenditure projections

Most procurement professionals expect growth in 2012, with 72% of respondents expecting revenues to increase over last year. These findings are similar to the ISM Semiannual Economic Outlook, where 69% of respondents expected revenue increases for 2012. The main reasons cited for expecting higher revenues are an increase in overall customer demand (63%) and the introduction of new product lines (46%). These results show that the U.S. manufacturing economy continues to gain strength; only 56% of respondents cited an increase in overall customer demand in 2011.

Capital expenditures are on the rise, with 88% of respondents planning to increase or maintain the current level spending in 2012, and 41% expecting increases (this percentage is on par with 2011). Similar results were published by the ISM, with 42% of companies predicting an increase in capital expenditures for 2012. 

Employment

The positive hiring trend of 2011 continues into 2012. Overall, 97% of companies plan to keep or increase the number of domestic employees, with 56% expecting to hire in 2012 (up from 48% in February 2011 and 24% in February 2010). These results are similar to the findings by the McGladrey Manufacturing and Distribution Monitor, where 60% of respondents expected to increase their workforce. 

Top Concerns

The cost of raw materials remains the top overall concern for 51% of respondents, although fewer respondents selected this concern in the top spot than in 2011 (66%). In prior years, the cost of components closely followed the cost of raw materials as a top concern, but in 2012 respondents cited purchasing processes, such as efficiency, measurements and cost savings, as their second biggest concern.

When asked to indicate the top three cost pressures causing the most concern, respondents most frequently cited the cost of raw materials (indicated by 55% of respondents in the top position). While cost pressures on raw materials also caused the most concern in 2011, the number of respondents citing it as the top cost pressure concern declined from 76% in 2011 to 55% in 2012. While 96% of respondents included this concern in 2011’s top three, only 81% included it in the top three in 2012. Respondents indicated that cost pressures on base materials for components is their second highest concern, with 52% including it in the top three. Healthcare costs were the third most frequently chosen, with 49% including it in the top three, up from 37% in 2011.

Forecast accuracy (scoring 4.9/5.0) and the ability of suppliers to keep pace on predictable demand (scoring 4.3/5.0) remained the biggest obstacles in purchasing.

In February 2011, respondents also selected these top two obstacles; however the gap between forecast accuracy (76%) and ability to keep pace on predictable demand (41%) narrowed from 2011 to 2012. Understaffing in purchasing ranked third highest on level of importance (3.0/5.0).

Lean Manufacturing the favored method

The survey showed that companies are actively deploying efficiency improvement programs and procedures. Lean Manufacturing was the most frequently cited improvement methodology, currently used at 69% of respondents’ facilities. 

3D Printing

3D printing and additive manufacturing are slowly making progress in the manufacturing world. Of the surveyed companies, 22% have purchased, are planning to purchase, or currently outsource additive manufacturing techniques to third parties. The majority of companies have not yet embraced this technology, with 49% of respondents being unaware or unsure of the benefits of 3D printing technology, and 29% not seeing the benefit of such technology. Yet, the industry is expected to grow at a rate of 7.2% annually, according to the IBISWorld report.

"We are seeing a strong growth trend from our members in revenue, capital expenditures and hiring, which are all healthy signs for our membership and manufacturing as a whole,” said Louise O’Sullivan, founder, president and CEO of Prime Advantage. “As the economy continues to pick up steam, our members know they have access to stable supply partners within our group with savings programs in place to make them more competitive. We’re fortunate to have industry leaders in our group, both on the member and supplier sides of our business, and we’ll continue to deliver savings as they grow their businesses.”

Summary of Findings

  • 72% of respondents expect to see their revenues increase in 2012 (compared to 73% in 2011)
  • 88% of companies expect to make the same level or higher capital expenditures in 2012, with 41% planning to increase capital expenditures from 2011 levels
  • The positive hiring trend continues into 2012, with 56% of companies planning to add employees in 2012 (up from 48% measured in February 2011)
  • The cost of raw materials remains the top cost pressure concern for purchasing professionals, followed by the cost of base materials and healthcare costs.

 

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me