Supply chain industry must close gap in innovation investment

MHI study finds companies understand the technology available but are slow to ramp up their capital expenditures

03/19/2014


The key results of the first MHI Industry Report, "Innovations That Drive Supply Chains," were:George Prest, CEO of MHI

  • The top two strategic priorities of executives are supply chain analytics and multichannel fulfillment.
  • The two major barriers preventing innovation in the supply chain are a talent shortage and a continuing focus on cost reduction.
  • Three emerging innovations are not yet top-of-mind for executives, but may be soon: sustainability, mobility/machine-to-machine technology and 3-D printing.

(Source: MHI Report)

The speed of data and the speed of technology change are driving major changes in supply chain and logistics strategies. The ability of industry leaders to stay ahead of the changes will be a big factor in how the industry responds to the rapid rate of change. That was the overall finding of the first MHI Industry Report, "Innovations That Drive Supply Chains," presented at the 2014 MODEX Show in Atlanta March 19. George Prest, CEO of MHI, and Scott Sopher of Deloitte, which helped conduct the study, presented the findings at the biannual MODEX Show. Prest promised it would be the first in an annual series of reports benchmarking the industry's opportunities and challenges.

Many of those opportunities revolve around technology advancements, many of which were on display on the MODEX trade show floor. The study found there is a gap between the innovations available and the actual investment in those innovations. Prest said many supply chain executives are "undervaluing the strategic importance of investing in new supply chain solutions." Prest noted that two-thirds of respondents were planning to make new investments in the next three years. "That's the good news,” he said. “Many say it will be to maintain, and not to drive competitive advantage. That's our challenge as an industry."

With plant floor analytics available everywhere, the ability to use that data to drive better decisions is one of the key trends emerging in the supply chain industry, according to the study. "There is cheaper data storage, faster processing time, and we can connect to Internet anywhere anytime," Sopher said. 

"We have better analytics than at any time. More and more companies using visualization tools with analytics to change behaviors."

But while 79% of the 450 executives surveyed for the report said analytics was seen as a strategic imperative for their organizations, fewer than half said they had well-defined strategies in that area, and only 54% of respondents said they were planning more investments in analytics. The emerging trend of using a single distribution source for all time of production distribution—a concept called omnichannel distribution—is another emerging trend for the supply chain industry. 

Fulfilling orders for retail, e-commerce and wholesale from a single center will require investments in technology and training. Again in this area there is a gap between the perceived importance of the issue (61% of survey respondents described it as important) and the technological capabilities of their organization (fewer than 20% rated their capability as "high"). That gap needs to close, Sopher said. "I believe to really serve and improve in multi-channel distribution, the industry is going to need improved material handling equipment.”

The rapid industry growth is expected to deliver a large number of new jobs. With an estimated 1.4 million jobs expected to be created in supply chain and logistics, companies are finding an acute skills gap to meet and fill those jobs with the technological skills needed. Prest put it succinctly: "The talent shortage is a barrier to innovation.” 

The three emerging trends in supply chain and logistics—Sustainability, 3D printing and additive manufacturing and machine to machine (M2M) communications and mobility—all face the same gaps in capabilities within their current organizations. For example, while four out of five executives feel sustainability is an important goal within their companies, 60% of respondents said there are significant gaps in their sustainability efforts. Of the three, mobility appears to be the one with the most immediate use within the facility. 

Several MODEX exhibitors were showing wearable equipment to help warehopuse personnel pick and place inventory. "It could provide people with the right information at the right time," said Sopher. "When you combine with analytics, that's a very powerful combination."

Want more from Modex? Click here for more coverage!



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me