Super Wi-Fi, the solution for the broadband

Currently around 7 million households in the United States, representing about 14 million people, don’t have access to broadband that meets the “National Broadband Availability Target” of at least 4 Mbps download and 1 Mbps upload.

12/14/2011


IMS research: excellence in market intelligneceCurrently around 7 million households in the United States, representing about 14 million people, don’t have access to broadband that meets the “National Broadband Availability Target” of at least 4 Mbps download and 1 Mbps upload. Most of these “unserved” households are located in rural areas. Wireless Internet Service Providers (WISPs) have been offering a solution to allow broadband access in areas not covered by cable or DSL. However, the technology used is limited and the service is still not accessible to everyone.

After the digital transition was completed in the US during 2009, the frequencies previously used for analog television broadcast were suddenly vacant. The unused spectrum between TV stations, called white spaces, was made available by the Federal Communications Commission (FCC) in 2010, driving the development of the wireless networking proposal of “Super Wi-Fi.” Different from the regular Wi-Fi solution, which uses 2.4 GHz or 5 GHz radio frequencies and has a short range, Super Wi-Fi uses UHF signals that penetrate several types of physical barriers and are able to travel several miles.

The FCC believes that the combination of rural WISPs and TV White Spaces could be the right mix of service provider and technology to reach the unserved households. For this purpose, the FCC announced the public testing of the first television white spaces database on September 14, 2011, allowing the trial of a wide range of TV band devices and applications on an unlicensed basis. This database system is provided by Spectrum Bridge and specifies a list of channels available for testing (not occupied by authorized radio services) by device type and by location.

Some companies have been working on Super Wi-Fi solutions and conducting trials for over a year. Carlson Wireless Technologies Inc., a provider of wireless broadband and voice solutions, has developed a TV white space broadband radio, called RuralConnect IP, that uses UHF frequency bands of 470-786 MHz, has a range of 7 miles, and is able to deliver speeds up to 16 Mb/s. This solution is more than sufficient to meet a household’s basic broadband needs. Carlson CEO Jim Carlson stated “TV white space broadband radio is the best solution to cover obstructed locations and unserved areas desperate for broadband access.” Carlson also indicated that the TV white space broadband radio has a wide range of applications which include the use with IP video surveillance, machine-to-machine (M2M) communications for the resource industry (oil, gas and mining) and for energy management (power energy, smart metering, etc.). Carlson expects to ship 30 thousand units during 2012, both in the US and internationally.

TV white space is a cost-effective way for WISPs to grow the potential households they can reach with broadband. The FCC’s plan of making broadband accessible to the rural unserved can be accomplished with Super Wi-Fi. The technology is there and proven solutions are already available, it’s now up to the WISPs to deploy them.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me