Study finds optimism among mid-sized manufacturers

Prime Advantage report shows hiring, capital expenditures will rise in 2013

03/06/2013


In its semi-annual Group Outlook Survey, manufacturing buying consortium Prime Advantage said its members are showing great optimism for growth in 2013 despite pressures over raw material and healthcare costs.

 

Among the study’s findings:

 

  • 68% of respondents expect revenues to increase in 2013

  • 87% of companies expect capital expenditures to grow or remain constant in 2013, with 39% planning to spend more than 2012 levels

  • 43% of companies plan to hire more employees in 2013 and 52% plan to maintain current employment levels. This is higher than the 39% that indicated they would be hiring in the second half of 2012

The cost of raw materials is a concern and is among top cost pressures for 90% of manufacturers

 

“We are encouraged to see that our members expect to see growth in 2013, after a very strong 2012 for most,” said Louise O'Sullivan, founder, president and CEO of Prime Advantage. “As they focus on profitability and margins, we look forward to partnering with both Members and Endorsed Suppliers to fuel the bottom line, reflecting Total Cost of Ownership, along with the top line, greater sales and market share."

 

 

 

Anticipating strong revenue and capital spending

 

Most small and midsized manufacturers expect to beat strong revenues of 2012, with 68% of respondents anticipating an increase in sales in 2013. New product launches are the main reason for expected revenue increases, cited by 61%, followed by an expected increase in overall customer demand, cited by 57%.

 

Capital expenditure planning remains healthy, as in the previous two years, with 39% of respondents planning an increase from 2012 levels.

 

 

 

Employment continues to grow

 

Manufacturers’ hiring plans remain in expansion mode, with 43% planning to hire more workers this year. Although this number is slightly down compared with 2012, when 56% of respondents planned hiring, it remains significantly above expectations in 2010, when only 24% of companies were hiring.

 

The top concern of 2013, the cost of raw materials, is also a leading cost pressure concern. More than 90% of respondents included raw materials in their top three cost pressure concerns and 42% cited this concern in the leading position. However, it is encouraging that this seems to be declining, relative to recent surveys.

 

Healthcare costs moved back into second place among top cost pressure concerns, with 57% of respondents including it in the top three. And in 2011, healthcare costs were cited as the fourth-greatest concern among small and midsized manufacturers.

 

The cost of base materials for components, although still in third place, was cited by fewer respondents as a concern than in prior years.

 

 

 

Nearshoring is here

 

Companies are seeking the benefits of near-shoring. In the past twelve months, more than one-in-five respondents have brought international sourcing closer to United States. These results are similar to the Grant Thornton Study on Nearshoring, where 25% of respondents indicated they brought sourcing closer to the U.S.

 

More than 70% of respondents have increased material and service purchases from American suppliers and service providers. Mexico is the second choice for sourcing, with nearly 28% of respondents moving sourcing to that region. The most frequently cited benefits that manufacturers hope to see in nearshoring are shorter lead times, as indicated by 67% of respondents, and lower inventories (49%). Among other benefits, companies cited better supply chain control (40%) and better overall communication (39%).

 

 

 

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me