Strengthening the global competitiveness of U.S. manufacturing

Chandra Brown, deputy assistant secretary for manufacturing for the U.S. Department of Commerce, spoke about the U.S. manufacturing sector and how the U.S. government is trying to strengthen its global presence, at the 2014 Women in Manufacturing (WiM) Summit. Exports are good for manufacturers, and companies with women on the board of directors have stronger financials.

09/30/2014


Chandra Brown speaking at the 2014 WiM Summit. Courtesy: Anisa Samarxhiu, CFE MediaExports are good for the manufacturing business, and companies with women on the board of directors have a stronger bottom line, according to Chandra Brown, the deputy assistant secretary for manufacturing for the U.S. Department of Commerce. Brown spends a lot of time traveling and advocating the strength of manufacturing. She has firsthand experience on what manufacturing companies need to do to thrive. Before joining the government, she served as vice president and CEO of United Streetcar, a subsidiary of Oregon Iron Works.

She started her keynote speech at the Women in Manufacturing (WiM) Summit in Schaumburg, Ill., with an important statistic: during the economic downturn the companies that exported goods grew by 7%, those who did not export diminished by 5%. Brown emphasized that the U.S. has the resources to help advocate for American manufacturing companies. Whether it is on-site help to manufacturing businesses that want to go into the international arena or advisory councils such as the National Manufacturing Council, the resources for success exist. One just has to look for them.

As Brown was at a summit for women in manufacturing, she presented another statistic: Fortune 500 companies that have women in their board of directors are more likely to have better corporate responsibility and a better bottom line. However, there aren't enough women in the manufacturing industry or on these executive boards. Although women make up half of the work force, only 24% of the manufacturing industry is made up of women and less than 5% are on the board of directors. Women are needed, she said, throughout the pipeline from the manufacturing floor to the leadership positions.

Brown concluded her address with this message: "We must change the perception of manufacturing to the general audience. We can do that by mentoring young people and get them interested in manufacturing, creating a more flexible workspace and incorporating more diversity in the workplace."

- Anisa Samarxhiu, digital project manager, CFE Media, asamarxhiu@cfemedia.com.

- See related stories from the Women in Manufacturing (WiM) Summit below.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me