Strategy trumps technology as key to innovation, growth

Technology and innovation are important, but finding the right strategy to turn and innovation into products that the market wants is even more important. Strategic thinking was on the minds of industry leaders at the Aberdeen Group’s Product Innovation Summit in Boston May 23. Attendees at the event, which was co-sponsored by Manufacturing Business Technology, heard from Aberdeen researc...

06/15/2007


Technology and innovation are important, but finding the right strategy to turn and innovation into products that the market wants is even more important.

Strategic thinking was on the minds of industry leaders at the Aberdeen Group’s Product Innovation Summit in Boston May 23. Attendees at the event, which was co-sponsored by Manufacturing Business Technology, heard from Aberdeen researchers and industry experts that developing the right kind of innovation was crucial.

“The ability to bring products to market profitably has tremendous room from improvement,” said Jim Brown, vice-president of product innovation and engineering research for Aberdeen. “Innovation is important, but innovation that doesn’t fit what the customer needs is less important.”

Author and former MIT professor Michael Treacy was more pointed in his remarks to the 200 people in attendance. “There is a glut of sameness in the market,” Treacy said. “You look at the problems of the Big 3 automakers. They didn’t get worse. The market got better.”

Toyota is one of those market forces, and Treacy said there’s a lot of information on the Toyota way %%MDASSML%% but perhaps less understanding. “There are 50 books on the market about Toyota alone, but do we really understand what they do?” he asked. “At Toyota, it’s not what they do, but the pace at which they are improving.”

He had a blunt assessment for innovation in the marketplace, noting that products ranging from breakfast cereals to cars have suffered from an oversaturation of brands without any really new about them. “If you’re not driving customer value, you’re not innovating,” Treacy said. “Engineers are trained to compromise. Innovation is about how to relax compromise.”

Repairing the broken process of innovation will take time, patience and a healthy dose of skepticism. “Product innovation needs a kick in the ass,” said Treacy. “If you want to improve product innovation, don’t take ideas at face value. It takes a very long-term commitment.”

He described that process as “performance management. It’s where the risks for performance have largely been eliminated, and only hard work remains,” he said. “Now how do you make that part of a company’s DNA?”

Yet all the discussion of innovation comes as industry leaders face the basic realities of profitability. When asked informally why product innovation is important to their company, 75% of attendees said it was about increasing revenue. Just 6% said it had to do with reducing costs.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me