States fail to enforce own drilling regulations

States across the country are failing to enforce their own oil and gas development regulations, a new research study showed.

12/11/2012


ISS SourceThe one-year, in-depth research project examined enforcement data and practices in Pennsylvania, Texas, Ohio, New York, New Mexico and Colorado and included interviews with ex-industry and state agency employees, according the to report entitled, Breaking All the Rules: The Crisis in Oil & Gas Regulatory Enforcement by Earthworks, a nonprofit.

“State enforcement of oil and gas rules is broken,” said Earthworks’ Senior Staff Attorney Bruce Baizel. “Across the country, public health and safety are at risk because states are failing to uphold the rule of law. Until states can guarantee they are adequately enforcing their own rules on an ongoing basis, state agencies must not permit new drilling.”

Failure to enforce oil and gas regulations means states are not seeking, documenting, sanctioning, deterring, and cleaning up problems associated with irresponsible oil and gas operations such as chemical spills, equipment failure, accidents and discharges into drinking water supplies.

Among the study’s findings:

  • More than half of all wells go uninspected each year: Hundreds of thousands of active oil and gas wells across the country do not undergo inspections.
  • Companies found in violation rarely suffer a penalty: Ambiguous policies and rules leave the consequences for violations unclear to the public, companies and even the inspectors themselves. Consequences vary from violation to violation.
  • Penalties are so weak it is cheaper for violators to pay the penalty than comply with the law: The total value of financial penalties in each state studied is less than or equivalent to the value of the gas contained in one single well.

Drawn from the data analysis and stakeholder interviews, the report makes numerous policy and regulatory recommendations to address the enforcement crisis, including:

  • Increase inspection/enforcement resources until they meet a systematically and transparently developed minimum.
  • Clarify and update rules so inspectors, companies, and the public know when operators are in violation, and the consequences.
  • Formalize the public’s role in enforcement, including sharing information with the public and allowing citizen suits.

“This report shows that the industry’s claim that ‘oil and gas development doesn’t threaten public health’ is a fraud,” said Earthworks Executive Director Jennifer Krill. “Until common sense changes are implemented, states must refuse to issue new drilling permits.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me