Starting screws

Problem: How can you get a screw started in a hard-to-reach area? Solution: Go crazy, glue that is. Put a drop on the screw slot to temporarily attach it to the driver. After screwed in, the driver is easily snapped off.

By Staff
09/01/1998


Problem: How can you get a screw started in a hard-to-reach area?

Solution: Go crazy, glue that is. Put a drop on the screw slot to temporarily attach it to the driver. After screwed in, the driver is easily snapped off.

Contributor: Jim Gross, Mechanical Engineer, Cerro Metal Products, Bellefonte, PA



<- Back to: Home

Top Plant
Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
» More
Product of the Year
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
» More
System Integrator of the Year
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
» More
June 2018
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
» More
May 2018
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
» More
April 2018
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
» More
June 2018
June 2018
Machine learning, produced water benefits, programming cavity pumps
» More
April 2018
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
» More
February 2018
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
» More
Spring 2018
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
» More
April 2018
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
» More
February 2018
February 2018
Setting internal automation standards
» More

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
» More
One Voice for Manufacturing
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
» More
The Maintenance and Reliability Professionals Blog
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
» More
Machine Safety
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
» More
Research Analyst Blog
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
» More
Marshall on Maintenance
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
» More
Lachance on CMMS
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
» More
Electrical Safety Update
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
» More
Maintenance & Safety
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
» More
IIoT: Machines, Equipment, & Asset Management
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
» More
Randy Steele
Randy Steele
Maintenance Manager; California Oils Corp.
» More
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
» More
Randy Oliver
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
» More
Data Centers: Impacts of Climate and Cooling Technology
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
» More
Safety First: Arc Flash 101
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
» More
Critical Power: Hospital Electrical Systems
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
» More
click me