Solis: OSHA to get 'back in the enforcement business'

In an address to about 4,000 occupational safety, health and environmental professionals at the opening of American Society of Safety Engineers' three-day conference in June at the convention center in San Antonio, U.S. Secretary of Labor Hilda L. Solis said they are ready to get to work to protect workers and thanked the attendees for all that they do to ensure worker safety.

07/01/2009


In an address to about 4,000 occupational safety, health and environmental professionals at the opening of American Society of Safety Engineers' three-day conference in June at the convention center in San Antonio, U.S. Secretary of Labor Hilda L. Solis said they are ready to get to work to protect workers and thanked the attendees for all that they do to ensure worker safety.

“Thank you all for the work that you do every day to protect workers as it is not easy,” Solis said. “Especially during these difficult economic times. I am also here to tell you that the President believes this government has responsibility to protect workers and protect them from unsafe workplaces.

“The Department of Labor is back in the enforcement business,” Solis continued. “We will be working with all stakeholders because as you know, workplace safety is everyone's business.”

Solis also announced that the Occupational Safety and Health Administration will launch a major construction safety initiative in Texas to prevent workplace fatalities and injuries.

The department noted that Texas has the highest rate of on-the-job fatalities than any other state. In 2008 there were 67 fatalities, and in 2009 there have been 33. Solis also noted that in 2007 and 2008 more than 3,000 inspections were conducted by OSHA in the southeastern states.

Solis noted that there are several people that have been nominated to serve at the DOL in a variety of positions, including the next OSHA administrator, yet they are still in the pipeline.

“We are ready to get to work as we have a lot to do to prevent workplace injuries and illnesses,” Solis said.

“I want OSHA to get back to being active and robust. And I want to make it clear that we want to partner with business to keep workers safe %%MDASSML%% to partner with safety professionals, businesses and communities.,” Solis added.

To do this, Solis discussed the proposed department budget for the DOL for 2010 of $1.7 billion to go towards programs which include $50.6 million for OSHA, allowing for the hiring of at least 130 more inspectors and an increase by 10% the number of inspections.

“Despite these tough economic times, we hope to have this budget approved,” Solis said. “We look forward to working with businesses %%MDASSML%% large and small %%MDASSML%% as we have in successful programs in New York and California. We will also be building on practices that work.

“We want to return respect to OSHA,” Solis said.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me