Solar industry capital expenditures set to rebound as emerging economies boost production

IHS reports that the solar industry will rise by 30% to $3 billion in 2014 because of increased sales in emerging economies in South America, Africa, and the Middle East.

09/10/2013


The sun is finally rising on the global solar business, with growing demand in developing regions helping to ignite the first increase in industrywide capital spending in three years in 2014, according to the PV Manufacturing & Capital Spending Tool from information and analytics provider IHS.

Global capital spending by producers of photovoltaic (PV) modules, cells, ingots, wafers and polysilicon is expected to rise by 30% in 2014 to reach $3.0 billion. This will mark the first time that expenditures have increased since 2011, when they grew 8%, as presented in Figure 1.

The projected growth will bring to an end a two-year period when spending dropped—by a stunning 72% in 2012, and by an anticipated 36% this year in 2013. During this period, PV industry capital spending will plunge by a gut-wrenching total of $10.6 billion, falling to $2.3 billion in 2013, down from $12.9 billion in 2011.

Solar industry players engage in capital spending in order to purchase manufacturing equipment and facilities used to produce PV raw materials or products. Spending has fallen in recent years because of massive overcapacity and oversupply, which has sent prices down throughout the supply chain.

However, a sustained increase in capacity from emerging economies is set to spur the 2014 recovery.

“South America, Africa and the Middle East now are leading the world in solar capacity additions—and they also are leading the capital expenditure segment of the PV business out of its slump,” said Jon Campos, solar analyst at IHS. “The overcapacity in PV production mainly has been concentrated in the developed solar regions of the United States, European Union and China. But as demand expands in new areas, PV manufacturers are gaining interest in producing their wares in these regions, resulting in new factory openings and boosting local capital spending.”

Dawn arrives for solar spending in emerging economies

After going up 23% in 2013, solar capital spending in emerging economies is expected to rise in the low 40% range for every year through 2017. In contrast, following zero growth in 2013, the established markets are expected to shrink by 5% to 10% during every year through 2017, as presented in Figure 2.

Among all the emerging economies, the largest percentage increase in capacity is occurring in South America, Africa and the Middle East.

Emerging markets account for 7.9 GW of the world’s total announced capacity for PV materials and products from ingots through modules, with the potential to climb to nearly 11 GW by 2017. Capital investments for the foreseeable future will largely remain in the areas of crystalline wafer production, cell and module equipment. 

Ending capital punishment   

The expected increase in capital spending comes as a welcome and long-anticipated change from the dismal conditions that have plagued the market in recent years. The solar shakeout has peaked and an inevitable return to reinvestment in equipment and technology is due in the near term.

“Our research is showing a return to market equilibrium with regard to supply and demand,” Campos said. “Overcapacity seems to be correcting itself, and from the last few financial announcements, a handful of solar companies have returned to profitability and widened margins. The last piece of the recovery puzzle is capital spending and investment in high-efficiency technology.” 

Spending spree

Beyond the rise in demand from emerging countries, other factors are contributing to the recovery in capital spending.

PV suppliers are engaging in new technology upgrades in order to enable higher efficiency and lower dollar-per-watt production costs. Equipment is also critical in allowing PV manufacturers to differentiate their products. Such differentiation can improve profitability and margins.

Current and potential trade conflicts concerning Chinese PV products could drive production to other locations, such as South America, Southeast Asia, Africa and the United States. In particular, U.S. states like Mississippi and Michigan are attractive regions for PV production because they provide cheap electricity and affordable land to manufacturers.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me