Snack food packaging growth takes on a global flavor

Ahead of 2012 PACK EXPO, PMMI releases global growth report

09/17/2012


Changing retailer demands, eating habits, demographics, regulations and sustainability efforts are common themes in packaging, but they’re especially apparent among bakery & snack product manufacturers. “Bakery and Snacks — Market Assessment 2012,” released this month by PMMI, details the effects of these trends for original equipment manufacturers (OEMs) as well as their customers. 

Growth patterns parallel demographic shifts

As reported in PMMI’s “Global Packaging Trends – Global Growth Markets for Packaging”, released in July 2012, world population growth is shifting to so-called emerging markets such as the Asia Pacific region.

The Bakery and Snacks market report notes bakery and snack products manufacturers will see that growth in action, with 4% growth predicted in U.S. sales of packaged snacks through 2015, but 7% annual growth to $334 billion in global sales of snack foods in the same period. Globally, bakery product sales are expected to increase 4.5% annually to $410 billion by 2015.

“Globally, regions such as Asia Pacific, Latin America and India are presenting the best scenarios for future growth for snacks and bakery products,” said Paula Feldman, director of Business Intelligence, PMMI. “Our global packaging report noted that by 2015, world population growth will spring largely from the Asia Pacific region, which is expected to see a 160 billion-person increase in that time.

Today, the United States is the world’s largest market for snacks, while European markets top the list for baked goods sales. And while 62% of the snack food companies surveyed for this market assessment see Asia Pacific markets as the source of the largest fraction of their sales growth, only 20% of bakery companies share that experience. 

Custom packaging is standard

Historically, changes in consumer eating habits have driven new product development. In 2012, the driving force has shifted to the retailer; many large merchants have their own specifications for the products they carry, Feldman said.

“In the bakery and snack foods arenas, retailers are specifying package sizes, multi-packs and variety packs to optimize shelf space, and they’re asking for retail-ready packaging for high-traffic areas,” she said. “Convenience and drug stores also have their own sets of requirements, and more than a quarter (26%) of respondents are developing packaging accordingly.”

Even dollar stores are making a difference: 27% of participants are distributing to dollar stores (and expect that part of their business to grow), and those venues are requesting smaller portions that they can sell for $1.

Retailer demands were cited by 42% of respondents as the main driver for changes to primary packaging, and 50% said they’re implementing changes in their processing and packaging operations to accommodate retailers’ requirements. 

Equipping manufacturers to meet customer demands

To accommodate the multitudinous change agents in the bakery and snack product marketplace, manufacturers are turning to packaging machinery OEMs.

“Their requests fall into three categories: functionality, support and integration,” Feldman said. “The OEM that wants to meet those needs will do best to build a relationship with the manufacturer and collaborate in the design process.”

This type of partnering will help OEMs better understand needs for machine cleanliness and sanitation, the features and functionality, and automation.

“Today’s baking and snack foods manufacturers want machines that can be flexible and run a variety of sizes, materials and packages; that are easier to clean and operate, ergonomically designed, and reliable. They need OEMs to clearly communicate recommended cleaning schedules and to provide knowledgeable technical support,” she says. “That’s in addition to

PACK EXPO International 2012 is at Chicago’s McCormick Place on Oct. 28-31. Learn more about PACK EXPO and register at www.packexpo.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me