Smarter energy monitoring with predictive maintenance, IoT solutions

Advanced power measurement is in widespread use in controls engineering to save energy and classify machine behaviors by using predictive maintenance and Internet of Things (IoT) tools to reduce costs and boost operating efficiency of equipment.

07/07/2018


I/O products using EtherCAT industrial Ethernet system offer advantages for a wide range of power measurement and predictive maintenance applications, from simple to complex. Courtesy: Beckhoff AutomationAdvanced power measurement is being used more frequently in controls engineering to tackle critical manufacturing challenges such as discovering ways to save energy, reducing peak loads, analyzing and classifying machine behaviors, and locating and dealing with energy hogs.

It also is used commonly to identify and track key energy usage statistics by tying them into predictive maintenance software and analyzing data using modern Internet of Things (IoT) tools to reduce costs and boost equipment efficiency.

Over the last two years, the industrial marketplace has seen a remarkable expansion in the availability of compact power monitoring technologies. A high percentage of these are not single-purpose, stand-alone devices. Instead, they are integrated into a standard input/output (I/O) platform. One way to accomplish this is by integrating the power monitoring electronics into a distributed I/O format—either in DIN-rail mounted terminals or machine mounted I/O modules.

This yields a number of immediate benefits, including a reduction in overall equipment footprint, streamlined I/O segments, shorter wiring and cable runs, faster commissioning, among others. In the context of PC-based control technology, these power monitoring solutions can be programmed in the same familiar software environment used for programmable logic controllers (PLCs), motion control, safety, robotics, and more, providing significant savings for engineers. 

EtherCAT in power monitoring applications

I/O products based on the EtherCAT industrial Ethernet protocol offer particular advantages for power measurement and predictive maintenance applications. Depending on the application, it is important to determine what energy-related information is needed, such as voltage, power quality, and harmonics. Another consideration centers around IoT. Many engineers are looking for more information to implement predictive maintenance.

For such applications, entry-level measurement terminals with basic measurement features can be helpful. Every machine can have one low-cost terminal to measure voltage, current, and power, and send the data from an EtherCAT network to a local or cloud database. If plant personnel see changes in the measured value, they know exactly which machine needs maintenance based on the measurements and on diagnostic features in EtherCAT, which enable highly localized identification of time-based events in machines and equipment.

Compact 3-phase power measurement I/O terminals can be used to measure harmonics, total harmonic distortion (THD), frequency, and power factors. Courtesy: Beckhoff AutomationFor applications where the need for power measurement is based on lowering the total production cost, a measurement terminal with more built-in features will be more helpful. There are 3-phase power measurement terminals with extended functionality that offer a wide range of additional features for mains analysis and energy management. Specifically, these can be used to measure harmonics, total harmonic distortion (THD), frequency, and power factor.

All measured currents and voltages are available as root-mean-square (RMS) values and the effective power and energy consumption for each phase can be calculated. The RMS values of voltage, U, and current, I, as well as the active power, P, apparent power, S, reactive power, Q, frequency, f, phase shift angle, cos φ, and harmonic are available to the user. Extended measurement terminals also can offer a very high measurement range, up to 690 V ac, 5A.

It is possible to monitor numerous channels simultaneously with a temporal resolution of up to 100 µs using the EtherCAT oversampling principle. Perhaps on the highest end of performance for I/O terminal-based power monitoring, compact variants are available that deliver an error maximum of 0.2% at 20 kilosamples per second (kSps) or 0.5% at 10 kSps. A standard PC-based control system has sufficient computing power for true RMS or performance calculation and complex custom algorithms based on the measured voltages and currents.

Through the oversampling principle, the I/O terminal can measure at shorter intervals than the cycle time of the control system. Also, by leveraging distributed clocks functionality, which is also inherent to the EtherCAT protocol, it is possible to measure power synchronously from numerous sources via other EtherCAT devices in the network. 

Power to the controls engineers

Software expansions designed to accommodate power monitoring in PC-based control systems also have elevated performance in system-integrated platforms. PLC libraries for the evaluation of raw current and voltage data can be supplied directly by power monitoring I/O terminals. Function blocks are available for the calculation of RMS values for current, voltage, and power.

These can be outputted as momentary or average values and maximum and minimum values are also available in the function blocks. Frequency and frequency spectra can be determined, such as harmonics in networks and their load in the form of total harmonic distortion (THD). All function blocks are available for single-phase and 3-phase systems.

Not long ago, this level of functionality and synchronization was reserved for complicated, expensive, and bulky "black box" devices that required their own programming software and existed inside a fairly closed ecosystem. This meant few machines could be afforded high levels of power monitoring technology for effective data analysis. Today it is possible to extract high-value power consumption data from all areas of a manufacturing environment from a control system fitted with the right I/O terminals. Controls engineers have more power to take energy monitoring into their own hands by adding compact I/O terminals with integrated measurement technology.

Sree Potluri, I/O application specialist, Beckhoff Automation. Edited by Chris Vavra, production editor, Control Engineering, CFE Media, cvavra@cfemedia.com.

MORE ANSWERS

Keywords: I/O platform, energy monitoring, EtherCAT

  • Advanced power measurement can tackle many critical manufacturing challenges.
  • EtherCAT-based I/O products can provide special advantages for power measurement and predictive maintenance applications.
  • Software expansions in PC-based control systems have elevated performance in system-integrated platforms.

Consider this

How can plant-floor operations improve energy management?

For additional information: www.beckhoff.com/power-measurement 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me