Smart Grid networking market in the Americas to grow to nearly $1 billion by 2016

The market for equipment supporting smart grid communications and networking to grow from $700 million in 2011 to nearly $950 million by 2016.

07/10/2012


http://www.imsresearch.comIMS Research (recently acquired by IHS Inc.) forecasts the market for equipment supporting smart grid communications and networking to grow from $700 million in 2011 to nearly $950 million by 2016. This growth is projected even as smart meter shipments are forecast to decline from 2012 onwards in North America and general economic growth remains elusive.

Smart metering projects in the mid- to late-2000s propelled North America’s market for radios and other networking hardware supporting feeder line tasks. Later growth in distribution automation intelligent electronic device (IED) shipments furthered this trend, supporting opportunity for traditional serial radios as well as a wide assortment of next generation solutions. As of 2012, smart meter rollouts are slowing in North America, however, substation modernization, distribution automation, and Latin America’s expected smart metering expansion will all counter this slowing to offer substantial total growth of smart grid networking equipment markets in the Americas.

Americas market for smart grid networking hardware, Source: IMS Research

Senior Analyst Donald Henschel comments: “Smart metering is only beginning in Latin America, but perhaps more interestingly, in North America, utilities are seeing increased efforts from AMI solution providers and grid automation specialists to effectively integrate smart meter data and infrastructure into more sophisticated distribution automation tasks. Distribution automation-enabled smart meter concentrators will hasten this process.”

 The supplier environment for smart grid automation and networking is in a dynamic period, with major substation networking supplier RuggedCom recently purchased by Siemens, and smart grid mesh radio provider Tropos acquired by ABB. Both ABB and Siemens offer deep catalogues of grid automation solutions, but their market presence in the Americas has not been as high as in other regional markets.

 “These acquisitions of networking and communications specialists by global automation brands reveal industry acknowledgement of networking as the next critical step to achieving the goals of the smart grid evolution,” Henschel notes.

This analysis is drawn from IMS Research’s recently published The Americas Market for Smart Grid Networking – 2012. The report evaluates the present and near future opportunity for suppliers of networking and communications hardware supporting automation of the smart grid in the Americas as well as market shares of key suppliers. Building on IMS Research’s experience in the distribution automation and smart meter markets, this market study investigates Ethernet and serial connectivity trends for intelligent electronic devices, security concerns of utilities, and the status of IEC 61850 adoption in the substations and feeders.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me